Philip's WIP thread - possible big updates :P

pip_polo · Post by **pip_polo** » Fri Jun 06, 2008 12:26 am

few updated pics of the car after a good clean.
two new mods since i last updated, ones easy to spot and the other is quite hard

edit: need to re-order some german plates, mine are all bent

K.I.T.T. · Post by **K.I.T.T.** » Fri Jun 06, 2008 1:04 am

UK plates + aerial?

Ash

pip_polo · Post by **pip_polo** » Fri Jun 06, 2008 10:08 am

K.I.T.T. wrote:UK plates + aerial?

Ash

1 point for aerial. lol

na i had to take my plates off as i got pulled for them, and when i did i bent them as the velcro was uber good lol

i'll give you a clue, it's inside

FaMeL · Post by **FaMeL** » Fri Jun 06, 2008 12:43 pm

You definitily need some spacers... 12mm in the front, 16mm in the back...

I like the aerial, i've boughted one for mine too...

pip_polo · Post by **pip_polo** » Fri Jun 06, 2008 5:36 pm

i'm after some 20 back and dunno bout the front but probs like 10

jackthelad1990 · Post by **jackthelad1990** » Sat Jun 07, 2008 1:10 am

very nice mate!

pip_polo · Post by **pip_polo** » Sat Jun 07, 2008 3:06 pm

i've now ordered a full set of spacers, hopefuly be on by inters.
20mm back and either 10mm or 15mm front (depending on which they have in stock)

the other mod was the little cubby box, quite hard to get from the picture like

Tim_GTi · Post by **Tim_GTi** » Sun Jun 08, 2008 11:18 am

Did you get a fine for your plates?

pip_polo · Post by **pip_polo** » Sun Jun 08, 2008 11:23 am

Tim_GTi wrote:Did you get a fine for your plates?

no, i played dumb and said they came on the car.

just a producer. my new ones should be on soon though

Tim_GTi · Post by **Tim_GTi** » Tue Jun 10, 2008 7:40 pm

pip_polo wrote: no, i played dumb and said they came on the car.

haha, only thing you can do really!

pip_polo · Post by **pip_polo** » Thu Jun 12, 2008 7:26 pm

20mm spacers now on:
Before:

During:

After:

i may also get 20mm for front, but prob get 15mm when they get them back in stock.
cost me Â£45 including next day delivery

chewy · Post by **chewy** » Thu Jun 12, 2008 7:42 pm

Where did you get them from?

pip_polo · Post by **pip_polo** » Thu Jun 12, 2008 9:37 pm

off of ebay. guy sells them, he has loads.
juts doesn't sell 15mm ones that bolt to hub then wheel to them.
start at 20mm

chewy · Post by **chewy** » Fri Jun 13, 2008 6:12 pm

Dont have a link do ya? cheers

pip_polo · Post by **pip_polo** » Fri Jun 13, 2008 7:45 pm

he has 7 lots left. Item number: 220240601212

top quality service too i asked a question and he replied next day.