For Sale Retrofit Cruise Control - Polo 9N and 9N3 inc GTI

Forum rules
Please Use The New FOR SALE CATEGORIES when listing an item for sale!
Post Reply
andy947
Bronze Member
Posts: 243
Joined: Sun Feb 05, 2006 9:28 pm

For Sale Retrofit Cruise Control - Polo 9N and 9N3 inc GTI

Post by andy947 »

For sale, 1 cruise control kit for the Polo 9N and 9N3

Bought the kit to fit cruise control to my Polo GTI, but am selling the car so won't get to fit it.

Includes the Brand New Genuine Cruise control stalk and wiring loom.

Pretty simple to fit, can supply instructions aswell.

£100 plus £5 postage.

Andy
Last edited by andy947 on Thu Jun 12, 2008 9:11 am, edited 1 time in total.
andy947
Bronze Member
Posts: 243
Joined: Sun Feb 05, 2006 9:28 pm

Post by andy947 »

Note, this is a brand new genuine VW Polo Cruise control stalk.

The Polo unit is a single unit for both stalks, so includes the wiper stalk aswell.
User avatar
pip_polo
Bling Bling Diamond Member
Posts: 2454
Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:

Post by pip_polo »

what is involved in this?
i was after one ages ago
andy947
Bronze Member
Posts: 243
Joined: Sun Feb 05, 2006 9:28 pm

Post by andy947 »

Remove steering wheel and old stalk, push the 6 pins on the loom into the correct positions on the connectors for the stalk, plg other end of loom into the control module under dash, hook one wire up to the brake pedal switch and hook one wire into one of the bulkhead connector blocks, refit new stalk and steering wheel, then enable with VAG-com.

Not hard, just a little time consuming to remove the dash trim and wheel.
andy947
Bronze Member
Posts: 243
Joined: Sun Feb 05, 2006 9:28 pm

Post by andy947 »

Image
User avatar
pip_polo
Bling Bling Diamond Member
Posts: 2454
Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:

Post by pip_polo »

soooooo tempting.

dont have 100 atm though.. :(
andy947
Bronze Member
Posts: 243
Joined: Sun Feb 05, 2006 9:28 pm

Post by andy947 »

Open to offers if anyone is interested.

Andy
mikehowett
Bronze Member
Posts: 199
Joined: Sat Aug 26, 2006 2:17 pm

Post by mikehowett »

Very interested in this mate, would you accept £85 inc postage?
User avatar
P777 DRU
New
Posts: 20
Joined: Wed Nov 21, 2007 11:57 pm
Location: Belfast NI

cruise controls

Post by P777 DRU »

intersed in the kit if u still have it. will it fit on a 9n tdi sport.
andy947
Bronze Member
Posts: 243
Joined: Sun Feb 05, 2006 9:28 pm

Post by andy947 »

Sold to mike above :)
Post Reply