Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Chat about your 9n Polo (inc GT and Fun)
vixpolo
New
Posts: 21 Joined: Sun Jun 15, 2008 6:34 pm
Post
by vixpolo » Thu Jun 19, 2008 11:40 am
i got a polo 1.2 S 52 reg, i think a part is missing? im not sure have a look plz
pip_polo
Bling Bling Diamond Member
Posts: 2454 Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:
Post
by pip_polo » Thu Jun 19, 2008 12:54 pm
is there meant to be a picture? if so i can't see it.
Lanttu
New
Posts: 19 Joined: Tue Apr 10, 2007 9:34 am
Location: Finland
Post
by Lanttu » Thu Jun 19, 2008 2:49 pm
I agree with pip_polo. The picture is the missing part.
pip_polo
Bling Bling Diamond Member
Posts: 2454 Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:
Post
by pip_polo » Thu Jun 19, 2008 3:04 pm
Lanttu wrote: I agree with pip_polo. The picture is the missing part.
FeeDub
New
Posts: 24 Joined: Tue May 27, 2008 7:37 pm
Post
by FeeDub » Thu Jun 19, 2008 4:59 pm
Fixed ya link for ya
Dezmoand
New
Posts: 20 Joined: Fri Feb 17, 2006 5:04 pm
Location: London/UK
Post
by Dezmoand » Fri Jun 20, 2008 3:29 pm
I can't be sure but I think that's one of the hoses that goes into the plastic cover over the engine.
Hope it helps!
vixpolo
New
Posts: 21 Joined: Sun Jun 15, 2008 6:34 pm
Post
by vixpolo » Fri Jun 20, 2008 6:11 pm
ok guys thx 4 support i took it to a garage, the tubes are in the right place now. but the car still does not rev over 3k
whitegtipolo
Bling Bling Diamond Member
Posts: 2262 Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo
Post
by whitegtipolo » Mon Jun 23, 2008 6:55 pm
sounds like your air flow meter playing up buddy or crank shaft sensor? get it on a vag com