front anti rollbar

kinder · Post by **kinder** » Mon Aug 04, 2008 8:47 pm

does any one know wheter the front anti roll bar should touch the chassis at the bends as i got a knockin nosie on bumps and it looks like its banign on there

tegwin · Post by **tegwin** » Mon Aug 04, 2008 11:17 pm

No....should deffinately not touch the chassis...

The ARB sits in two brackets bolted to the chassis and is linked to the lower suspension arms via rubber bushes either end...

If its touching anything else then you have bent something!!!

kinder · Post by **kinder** » Mon Aug 04, 2008 11:27 pm

thats where its touching near the bolts that attaches it but it like it both side