Wheels Again

Chat about your MKV (6N2) Polo GTi
Tom W
Getting There!
Posts: 56
Joined: Sun Mar 02, 2008 7:13 pm

Wheels Again

Post by Tom W »

Right then folks,

I am also getting pretty fed up of my standard black wheels with the polished lip so i am looking for something with a deepish polished dish costing somewhere within the hundreds rather than thousands. I would like to buy new with tyres but may think about re furbing some old wheels :) So what do we reckon?? suggestions please :)

Thanks Tom
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

Ronal LS :wink:
tomo87
Platinum Member
Posts: 1579
Joined: Mon Dec 12, 2005 8:48 pm
Location: Dorset
Contact:

Post by tomo87 »

max's RM's?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

Yeh Ronal LSs are probably the cheapest decent looking alloy with a lip.

Either them of ATS cups, or you could could go 13" with some wellers? 8)
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

Do 13"s even fit over the standard 256mm brakes? :?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

I've seen them done, so i know it's possible. It would be quite selective though I'd imagine.
CymruPolo
Not so new
Posts: 566
Joined: Mon Nov 05, 2007 10:12 pm
Location: north Wales, UK

Post by CymruPolo »

13" would look waayy too small IMO.
Tom W
Getting There!
Posts: 56
Joined: Sun Mar 02, 2008 7:13 pm

Post by Tom W »

tomo87 wrote:max's RM's?
I think i need to know a little more about these :lol:

I like the Ronal LS too maybe i will look into a set of these :)

Perhaps i will be inspired at the VW festival. Thats another thing, will there be any sort of UK Polos club stand?

Cheers Tom
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

No Club Stand at VW Festival I'm afraid Tom. There was not enough interest to book one! :(
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

CymruPolo wrote:13" would look waayy too small IMO.
Agreed, I was just throwing it out there 8)
Tom W
Getting There!
Posts: 56
Joined: Sun Mar 02, 2008 7:13 pm

Post by Tom W »

Sorry to bump up this old thread but i think i have finally decided that i need to order some Ronal LS. Good wheels for the money? I think i will prob order them from rimstyle so i can get some 5 mm spacers and longer bolts for the rear all on one order. I have decided to source the tyres elsewhere so i can get the stretched. Please send your posative and negative opinions :)

Thanks :)
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

Yeh LSs are a good choice, decent value for money. I considered them myself at one point. I'd go with 10mm spacers at front, and 20mm on back though 8)
Tom W
Getting There!
Posts: 56
Joined: Sun Mar 02, 2008 7:13 pm

Post by Tom W »

ill get on it then, 10mm from and 20mm on the back it its! that should get them stuck out hopefully! 8)
big_k
Getting There!
Posts: 82
Joined: Thu Sep 20, 2007 2:38 pm

Post by big_k »

10mm on front and 20mm :lol: on back is impossible unless running 165 or 175/50s or some serious flare.... trust me, go for 5 up front and 10 round the back and even then you'll shred your tyres if you're lower than 60mm or so... id personally run 185/45's and use 5mm spacers on the back... Just my opinion anyway... with your 20mm plan you're talking et5!! How low u plannin on going an how much stretch are u willing to run??


Edit: heres my car on 15x7s with a 15mm spacer on the back making them et23...they scrub a fair bit if i keep the car any lower than this... running 195/45s btw! Oh an the front is now lower 8)
Image
User avatar
BIG RHYS
Gold Member
Posts: 586
Joined: Sat May 17, 2008 1:47 pm
Location: Newport,Wales

Post by BIG RHYS »

That is the look i want with my car i was thinking of going 10mm front and 20mm on the back, but since i have seen wat u have said i am having second tinks on it..

wheels i got r 16" by 7J on 195/40 tires slamed quiet alot is well

wat have u got on the front?
Post Reply