hi, am looking to upgrade my front sidelights, foglights and full beam bulbs to match the zenons and something brighter than standard.
what do any of you recomend?
cheers JJ
uprated bulbs?
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
just fitted all these for mine:
Full beams:
http://www.hids4u.co.uk/store/product.p ... =13&page=1
Front indicators:
http://www.hids4u.co.uk/store/product.p ... t=6&page=1
Sidelights
http://www.ultraleds.co.uk/ultimate-501 ... e8372a0260
Fitted them today, they're perfect.
My fogs are just cheap blue paint bulbs from eBay, they're a really good colour match to my 6000k xenon bulbs, best I've found in a standard bulb (and I've tried out alot!). They're crap quality in terms of light dispertion though. But who needs quality fogs when you have 6000k HID dipped and mains
Full beams:
http://www.hids4u.co.uk/store/product.p ... =13&page=1
Front indicators:
http://www.hids4u.co.uk/store/product.p ... t=6&page=1
Sidelights
http://www.ultraleds.co.uk/ultimate-501 ... e8372a0260
Fitted them today, they're perfect.
My fogs are just cheap blue paint bulbs from eBay, they're a really good colour match to my 6000k xenon bulbs, best I've found in a standard bulb (and I've tried out alot!). They're crap quality in terms of light dispertion though. But who needs quality fogs when you have 6000k HID dipped and mains
- chrisjames
- Silver Member
- Posts: 413
- Joined: Tue Apr 08, 2008 8:55 pm
- Location: Edinburgh / Poole
- Contact:
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
On the GTi, the standard dipped bulbs are 4300k, so a white with yellow tint. 6000k are white with a blue tint, far better IMO. Plus it's likely that the bulbs are still the originals, so they are 7-8 years old, new bulbs will be far far brighter!jj_2388 wrote:cheers. what are the standard zenon diped, 6000k? also was thinking about hid full beams, ehat are they like and how easy to fit considering the factory zenon control unit in the way?
cheers JJ
Fitting H1 HIDs is pretty easy, check here to see where I mounted y ballasts:
http://www.tigerstyle.co.uk/poloforum/v ... &start=210
Basically if you want nice bulbs, bright/white etc, get HIDs or LEDs. Filaments just don't relaly crack it these days.

