Need Help.....Converting to 9n3 tail lights.....Sorted!!!!

POLOZ · Post by **POLOZ** » Tue Sep 02, 2008 5:24 pm

Hello there,

I know this has been discussed before...but could somebody who has done this to there polo please give me a detailed discription along with pictures if possible....as other threads have not given enough details as how to remove the wires....

Thanks
KJ

stig247 · Post by **stig247** » Tue Sep 02, 2008 6:07 pm

i did it on mine and wrote a how to guide youl find it in how to section/guide somewhere i cant remember how to do it as it was quite a while ago

POLOZ · Post by **POLOZ** » Tue Sep 02, 2008 6:12 pm

stig247 wrote:i did it on mine and wrote a how to guide youl find it in how to section/guide somewhere i cant remember how to do it as it was quite a while ago

I know mate...i had a look....only trouble is that i cant get the wire out...

Could you shed some light.

Cheers
KJ

POLOZ · Post by **POLOZ** » Tue Sep 02, 2008 9:17 pm

Any body!!!!!

panda · Post by **panda** » Wed Sep 03, 2008 2:43 pm

you can buy a tool to remove the pins from the plug. Snap-on Bluepoint do them.

POLOZ · Post by **POLOZ** » Wed Sep 03, 2008 5:10 pm

panda wrote:you can buy a tool to remove the pins from the plug. Snap-on Bluepoint do them.

Could you send me a picture of the tool...

stig247 · Post by **stig247** » Wed Sep 03, 2008 8:18 pm

I think you need to use two very small screwdrivers once you get one out youl know how to get the rest out very easily, sorry i cant be of more assistance i just cant remeber how i did it

POLOZ · Post by **POLOZ** » Wed Sep 03, 2008 8:18 pm

Has anybody seem the adaptor port for the conversion on ebay?even the german ebay?

POLOZ · Post by **POLOZ** » Fri Sep 05, 2008 7:48 pm

Well Everybody....Sorted out the tail lights today.....After its done.....i would say its easy as hell.....
here are the snaps:

Only adjustment needs to be done on the left/passenger side.....and its the same on the driver side....

stig247's guide was useful but I developed a new technique as how to remove the pins from the adaptors......so will be soon posting a updated guide.....

Anyways...PM if anybody who is thinking of changing to 9n3 tail lights....

KJ