car bouncing

Tim_GTi · Post by **Tim_GTi** » Fri Nov 14, 2008 1:45 pm

camber shims are what your looking for mate. they're normally used on the scene to increase negative camber to get more tuck in, can be used the otherway tho. they're fully adjustable

1der · Post by **1der** » Fri Nov 14, 2008 1:47 pm

good place to get them?

Tim_GTi · Post by **Tim_GTi** » Fri Nov 14, 2008 1:52 pm

im on the net on my phone at the mo, so its a bit of an effort to find you a link sorry. if you search 'camber shims' on clubpolo or edition38 theres a usual link on there to a shop.

1der · Post by **1der** » Fri Nov 14, 2008 1:53 pm

ok no bother tim. il have a search

tegwin · Post by **tegwin** » Fri Nov 14, 2008 2:39 pm

Does anyone know... how much lowering the car effects rear toe?

I assume the camber shims people have used have a wedge on both camber and toe to return it to straight?

Tim_GTi · Post by **Tim_GTi** » Fri Nov 14, 2008 2:50 pm

yeh my toe is out. I wouldn't have thought camber shims would fix that tho

tegwin · Post by **tegwin** » Fri Nov 14, 2008 3:24 pm

Im not sure what the camber shims for the polo are like..

The ones I fitted to my sierra when I lowered it fitted between the upright/hub and the suspension arm..

They were tapered in both directions so corrected for camber and toe.... Are the polo ones not similar?

Tim_GTi · Post by **Tim_GTi** » Fri Nov 14, 2008 3:29 pm

I've only seen pictures of camber shims, they're round, and look a bit like a timing meter on a house boiler?

so i'm assuming they go between the hub and wheel.