Colour Coding

jaydeezey · Post by **jaydeezey** » Thu Dec 18, 2008 12:53 am

Im looking to colour code my bump strips. I've been reading through previous posts and have read that the doors strips are clipped on, is this the same for the bumpers. Also coding door handles and mirrors caps any tips and advice on removal would be great.

chewy · Post by **chewy** » Thu Dec 18, 2008 3:22 pm

Send mc_iver_9n a pm he has just had it done to his

mc_iver_9n · Post by **mc_iver_9n** » Thu Dec 18, 2008 3:32 pm

Yea think they are all clipped in mate. Not sure about removal of the handles or mirrors as it was a drive in drive out jobby

jaydeezey · Post by **jaydeezey** » Thu Dec 18, 2008 6:21 pm

Thanx for the reply both, Im looking to remove all trims before painting to save labour costs etc. Can anyone else confirm they are definately clipped on, before I start yanking them off.

POLOZ · Post by **POLOZ** » Thu Dec 18, 2008 9:53 pm

Just color coded my car last week.....and please note....

The door strips are not clipped on.....they are stuck on with sticky tape.....

I phoned my local stealers and they said their were no clips manufactured for the door trims.....

Also the bumper trims just snap off and snap on....but be gentle.....

mc_iver_9n · Post by **mc_iver_9n** » Thu Dec 18, 2008 11:12 pm

Oh ok then, I was told they were all clipped

- I just bought pre-primmed ones the took them in so never saw

POLOZ · Post by **POLOZ** » Fri Dec 19, 2008 6:00 pm

mc_iver_9n wrote:Oh ok then, I was told they were all clipped - I just bought pre-primmed ones the took them in so never saw

Well I was confused at first when I was removing the strips....

It could be different on the primmed ones.......as I was speaking to the parts fella and he said there was nothing specified on the comp!!!

jaydeezey · Post by **jaydeezey** » Fri Dec 19, 2008 8:30 pm

Thanx for the replies, I will post an update once I've removed the trims.