Custom Coded :-) Video and one pic lol

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Custom Coded :-) Video and one pic lol

Post by KennyPOLO_Gti »

Well was off today so took my car to the nearest Custom Code dealer. Wasn't happy with my APR remap, especially since i couldnt keep up with a Ibiza 1.8T the other day (Remap, Induction, and D.V!). So guy took my car out this morning and logged everything through VAGCOM and sent the results away to CC along with a list of my mods and told me to come back 3 hrs later. So arriving back i was excited to see if there would be any difference, but thinking dont get your hopes up kenny! Well the guy put the new map on and took it out a spin with the VAGCOM again, when he was pulling away from the garage he put the foot down and a was left standing there with the biggest smile ever, it looked and sound quicker!!! Well he got back, i squared him up then it was my shot :D :D :D :D :D :D What a Fooking difference!! Night and day :shock: Now i feel my turbo kicking where it never before, and when it kicks in, it fooking kicks in :shock: :shock: :shock: !!! The roar off the Milltek is amazing, total head turner!!!! :P

Been raining all day here so 1st 2nd and 3rd is just wheel spins when the turbo kicks in so looking forward to the dry weather, think i'll need to get clutch & flywheel done soon! :roll:

312mm set up is going on tomorrow, standard really arent up to it anymore! :|

Kenny
Last edited by KennyPOLO_Gti on Mon Mar 09, 2009 9:17 pm, edited 3 times in total.
Top
shanethb
Getting There!
Posts: 91
Joined: Mon Jun 11, 2007 5:03 am
Location: Brisbane Australia
Contact:
Contact shanethb

Re: Custom Coded :-)

Post by shanethb »

good work Kenny, I got phase 2 on my polo a couple of weeks ago. Dam it feels good. Are you going to dyno yours???
Top
ViLus
New
Posts: 36
Joined: Sun Apr 25, 2004 11:03 pm
Location: Finland

Re: Custom Coded :-)

Post by ViLus »

Ohh dear, I remember that day... Tons of fun... Still is...
Top
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Custom Coded :-)

Post by KennyPOLO_Gti »

Just been out another wee run there and i just cant believe how quick it is now!!! It boosts around 2.5K revs hard then again you can feel it boost around 4K revs all the way to the end :P Just trying to get use to it, am a bit hestitant the now! :shock:

RR a.s.a.p 8)
Last edited by KennyPOLO_Gti on Sat Mar 07, 2009 12:55 am, edited 1 time in total.
Top
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Custom Coded :-)

Post by whitegtipolo »

heard only good things about custom code been inquiring on the sly a bit back but then my car got wrapped , they rang me today actually to see what i was doing LOL so kenny do you recommend them highly?? :P
Top
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Custom Coded :-)

Post by KennyPOLO_Gti »

I cant recommend them enough!! I love my polo again!! :-)

Mind that feeling when you get your car mapped from standard to stage one, its like that feeling again!! Been looking through forums, and ppl with similar mods are gettin 230-240 bhp, and it doesnt feel far off! Will get a vid up soon of a 0-60 etc when it drys up. Too much wheel spin the now :roll:
Top
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Custom Coded :-)

Post by whitegtipolo »

i heard this also on the seat website when they fit a k03s etc etc, i have same mods as you basically but no cat, do they turn the lamba light off?? cos i wanna just remove the sensor from the loom completely! :P mine still being repaired at least i will have the new brakes for stg2 lol :P
Top
User avatar
Jeff GTi
Platinum Member
Posts: 1789
Joined: Sat Jan 06, 2007 1:54 pm

Re: Custom Coded :-)

Post by Jeff GTi »

sounds really good, though im confused as to your not getting on with apr, my car runs perfect with my setup and goes like lightening also, really quick, be interesting to compare on the rollers asap
Top
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Custom Coded :-)

Post by KennyPOLO_Gti »

I got mine de-cated lastweek chris, so will be running the same as you apart from the induction i think :? My lamda is out the car, told them that too at CC.

Jeff, who knows what happened with the APR remap, only difference was i got the standard fuel stage 2 (why i dont know) but we have the same mods pretty much apart from the N75J valve, which mine wouldnt run with which i found strange?? Gonna fit the J valve again tomorrow but i honestly dont think it will need it as i think the K03s is at its limit.

With my APR map I knew it wasnt right when i couldnt keep up with a Ibiza like i said before and i couldnt get away from a peugot 206 180gti (been chipped, but still should pull away no probs) and a clio 182!!!! :evil:

With stage one i could get 145mph (on a track) no worries flat out, but when stage two was on my engine was screaming at me at 135!!! :(

Anyways all has worked out now and am getting my 312mm brakes on tomorrow then i need to get a new clutch next month :-)

Pics to follow :D
Top
User avatar
more-bhp
Gold Member
Posts: 508
Joined: Sun Dec 23, 2007 9:12 am
Location: Northwest
Contact:
Contact more-bhp

Re: Custom Coded :-)

Post by more-bhp »

Nice one Kenny... so you went for some STRONGER programming after all... told you that would be a good idea...

its amazing the difference between lets say 1.1 bar and 1.4 bar .. as you say they go like fook..

Good to hear that your frustrations might be over..

Hopefully the roads will be dry today... and you can go have some fun.. hehehe
Top
Alex_White_Gti

Re: Custom Coded :-)

Post by Alex_White_Gti »

Like jeff says....i have had stage 2 apr fitted and its fine....very quick like he says.
At least your happy anyway....obviously... :lol:

Im having mine RR today so i wil be posting up some results.
Top
stanmoar
New
Posts: 20
Joined: Sun Nov 06, 2005 5:36 pm
Location: in the big white plane

Re: Custom Coded :-)

Post by stanmoar »

Kenny, did you use a Guy called J Gracey? just outside Glasgow thats who i used for my Custom code map and he was very good!!!
Top
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: Custom Coded :-)

Post by KennyPOLO_Gti »

Its still feking raining here!!! :evil: :evil: :evil: :lol:

Yeah loving my polo again, just not drivable at all the now in the rain :(

Yeah JGraice is the name of the place, the guy that done it was Gerry i think, top guy :D The place is just over the Erskine Brige coming from Ayrshire direction :wink:
Top
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Custom Coded :-)

Post by whitegtipolo »

cool sounds good kenny, so you spent alot on repmaps to date LOL i wouldnt bother with the j valve bud!
Top
User avatar
Jeff GTi
Platinum Member
Posts: 1789
Joined: Sat Jan 06, 2007 1:54 pm

Re: Custom Coded :-)

Post by Jeff GTi »

KennyPOLO_Gti wrote: Yeah loving my polo again, just not drivable at all the now in the rain :(
surely thats not good with british weather, particularly scottish weather
Top
Post Reply

Return to “MK7 (9N3) Polo (inc GTI) - Years 2006-2008”