Boot Release kit 6N2

[ecu971]

Hi
I have installed r-click remote central locking kit on a 6N2 Polo with manual locking. It works fine. Next step for me is installing a boot release kit but i have problem to override the lock in trunk. I have poor instructions have do it, if lock is locked i cant move the "pinn" with motor. How to override lock?

[AWESOMEAUTOMOTIVE]

you can only connect it as a remote boot release as there is no physical means of connecting it to the central locking
the rod that activates the actual lock mechanism is very easy to connect to and the good thing is that the boot will always be locked but you will be able to open it remotely
here is the install guide i posted a while back to help you
http://www.uk-polos.net/view ... 10&t=42873

[ecu971]

Where do i connect rod? If you look on picture you can see that lock-pinn is stopping rod to move, if i put it in unlock i can open with handle? And what startposition should the motor be in.

[AWESOMEAUTOMOTIVE]

look at how i mounted mine
mine is always locked so keep it in the locked position and work your rod and motor accordingly to clear the barrel
it is on the opposite side as it is easier to pull on the boot lock rather then pushing as you have done
also your rod is way to bent it needs to be as linear as possible
mine is bent into a L shape but is still in line with the boot mechanism rod

[ecu971]

Now i get what u mean. I have an other problem, hydralic will not open door. When door is closed hydralic is moving door down. Wonder if i can move it? Its an y2000 polo 6n2.

[AWESOMEAUTOMOTIVE]

it needs to be securely mounted to stop it from doing that