i got a polo 1.4 16v 99.
i want to give more juice any advice?
the kits AIR INDUCTION KIT, got more horse power? or only noise?
helps its welcome
_____________________________________________
Moved to correct section by Tim_GTi
polo 1.4 16v 99
polo 1.4 16v 99
hi there.
i got a polo 1.4 16v 99.
i want to give more juice any advice?
the kits AIR INDUCTION KIT, got more horse power? or only noise?
helps its welcome
_____________________________________________
Moved to correct section by Tim_GTi
i got a polo 1.4 16v 99.
i want to give more juice any advice?
the kits AIR INDUCTION KIT, got more horse power? or only noise?
helps its welcome
_____________________________________________
Moved to correct section by Tim_GTi
-
Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: polo 1.4 16v 99
Hiya mate, your car is probably a 6N (mark4).
is it the same mark as this?
In regards to induction kits, your looking at very small gains, although it is good to free up airflow. But it's all about the noise really.
is it the same mark as this?
In regards to induction kits, your looking at very small gains, although it is good to free up airflow. But it's all about the noise really.
Re: polo 1.4 16v 99
yes its a (6N)
what can i do then?
what can i do then?
Re: polo 1.4 16v 99
Start with the basic.
An induction kit is mainly noise or very little gain in performance. However, get yourself a BMC kit for induction.
4-2-1 Manifold
De-cat or sports cat or some kind.
Bacbkbox (specific to your motor and not universal)
Schrick fast road cams
6n2 GTI bottom end
Rally bearings for the gearbox (hopefully would make the chocolate gearbox slightly stronger!)
That's all I can think of lol. I was going to do all of the above but I had too much bad luck and high insurance meant performance gains was out of the question.
Search for 'FrankiePolo' who has a build thread or something in the mk4 section. He had a valver geared towards power.
An induction kit is mainly noise or very little gain in performance. However, get yourself a BMC kit for induction.
4-2-1 Manifold
De-cat or sports cat or some kind.
Bacbkbox (specific to your motor and not universal)
Schrick fast road cams
6n2 GTI bottom end
Rally bearings for the gearbox (hopefully would make the chocolate gearbox slightly stronger!)
That's all I can think of lol. I was going to do all of the above but I had too much bad luck and high insurance meant performance gains was out of the question.
Search for 'FrankiePolo' who has a build thread or something in the mk4 section. He had a valver geared towards power.
Re: polo 1.4 16v 99
how much will cost all that morelss? €€€€
Re: polo 1.4 16v 99
Tim! my old 6n! =) Looooooks rude! i miss it 
-
influenceamc
- New
- Posts: 22
- Joined: Mon Apr 20, 2009 1:01 am
Re: polo 1.4 16v 99
super charge ure polo thats what im doin to my 1.4 16v mines currently at 120bhp (gas flowed) once i put a supercharger on it that will bring it up to about 160bhp and it will cos me about £1000 !
including
racing performance ecu
bmc cda induction kit
full exaust system
including
racing performance ecu
bmc cda induction kit
full exaust system
Re: polo 1.4 16v 99
Changing everything apart from the cams you should see 130bhp.
Schrick cams would give you a lot more but costs around £500 on its own! Worth the pennies although I haven't done it myself. Not sure how much bhp the cams would add to the 130bhp. Perhaps ask around as a few people have done it.
Schrick cams would give you a lot more but costs around £500 on its own! Worth the pennies although I haven't done it myself. Not sure how much bhp the cams would add to the 130bhp. Perhaps ask around as a few people have done it.