My 9n

[LWeatherill]

Only passed my test last month so not much progress yet.

Any ideas for mods?






Let me know what you think...

[JB_UK]

-Colour code bumper strips/ wing mirrors
-Fogs?
-Angel eyes?
-Alloys, look for some pics on the forum there are some great looking wheels out there
-Get the stance right
-ICE
-Colour code door handles
-de-wiper

Ive not done much to mine due to money but if i could that would be my list of jobs

hope this helps

[chewy]

Lower
Alloys

Get your stance right

Whats that on the rear light?

[LWeatherill]

I'm afraid it's a good old pair of tights at the moment, looking to get a set of 9n3 rear lights for it.

Also i got quoted around £200 for the colour code (which sounded abit much?), the guy said i would need to buy pre primed strips but surely the originals could just be sanded down until they are smooth?

Thinking of painting the mirrors Gloss Black too


Plans:

De-Wipe
9n3 GTI Back Box
Colour Code Bumper Strips
Gloss Black Mirrors
Pressed Plates
Powdercoat Alloys
Tints (medium rear, fade to light at front)
9n3 Rear Lights
Lowering Springs (can't afford coilies yet)
Smoked Angels
HID's

[chewy]

I know a lad selling a set of 30mm Eibach lowering springs if your interested £50 iirc only covered a few thousand used to be mine

Yeah you can sand the bump strips and prime them.

9n3 rear light require some work to the wiring

[LWeatherill]

i'll have to wait a while till pay day :/ but thats sounds cheap to me.

you got a pic with them on the car?

How much should i be paying for the colour code do you recon then?

yer i know about the wiring. I've downloaded a guide on how its done =]

[chewy]

30mm springs and 17's



Colour coding if you do all the prep work on the rub strips would be a lot cheaper, try asking a few different body shops to get a rough idea

For the rear lights K.I.T.T on here is in the process of making an adaptor so no work needed

[ihpj]

Don't mean to sound out of step here....

...but I hope you intend to declare some of those MODs to your Insurance Co. - you may find that some MODs may load your premium further being a 'new driver'. Might be worth waiting before you go storming into things like bling alloys / lowering / bodykit etc. ...

[LWeatherill]

Don't worry those plans wont be happening in the near future but everything i do will be declared =]

[david burton]

Get the votex kit for sale in the for sale section

I sanded and primed my own strips but it took a whole weekend....

[LWeatherill]

How much did the body shop charge for the spray if you sanded and primed yourself?

[matty]

hi just have look in this web for polo bodykits http://www.parts-depot.co.uk/shop/ go down the vw bit and kit this is my polo just have a good look on ebay

[david burton]

How much did the body shop charge for the spray if you sanded and primed yourself?

I got my kit sprayed and fitted at the same time for £350. I would imagine it would be about £150 for just the bump strips. They always charge a min amount as an initial cost.

To be honest I would spray the strips myself, you can get away with a lot more flaws on the narrow surface. If you do the lacquer right and wet+dry/mop it after a couple of weeks of hardening you will be fine.

[Veedub9n]

30mm lowering springs you can barely tell the difference unless your parked up next to a standard height 9n. Just wait and buy a decent set of coilies.... will be worth the wait. You'll only end up buying coilies in the end anyway haha.

Angel eyes are a pain if a bulb goes. Been there done that and went back to standard lights (Sprayed the insides of the lights while they were off the car )

[blkpolo]

30mm lowering springs you can barely tell the difference unless your parked up next to a standard height 9n. Just wait and buy a decent set of coilies.... will be worth the wait. You'll only end up buying coilies in the end anyway haha.

Angel eyes are a pain if a bulb goes. Been there done that and went back to standard lights (Sprayed the insides of the lights while they were off the car )

You got any pics of your lights now? Been thinking about doing this.