Another Seat Cupra Bushes Question

[POLOZ]

Guys well recently I was hearing a loud 'clank' noise from the driver side, so booked it with the mechanics and found out the wishbone or TCA bushes had gone for the second time
Anyways now I want to get it done properly by replacing it with seat cupra bushes. Now to save labour charges, mechanic has adviced me to get the whole part (forgot what its called) which holds the whishbone bush.

Now, i have the part numbers for the cupra bushes, the main question is can I get this whole part as mentioned above plus pointed out in the image below, off a cupra to fit my POLO????

[RUM4MO]

The answer to this has been given on http://www.seatcupra.net - in short, if your car just happens to have a 6 speed gearbox, then yes you can buy a pair of Cupra consoles for mounting the TCA into. If not then you will need to buy a couple of TCA rear bushes for a Cupra and get them fitted into your current consoles.

One thing, these consoles cost £70+ each.

[chewy]

I have the tool need to fit this if you want to do it yourself?

Come with new bolts for the wishbone and the lube needed, all you need are the bushes

PM me if interested