Measurement Required

Post by **Josh_PoloGTi** » Sun May 16, 2004 11:32 am

Calling a GTi Owner that has NOT lowered their car, please can you measure between the middle of the wheel arch (the lip) and the centre of the wheel (in the centre cap).

If you could measure using mm, that would be cool.

Prash · Post by **Prash** » Sun May 16, 2004 8:33 pm

i'll go have a look now for u

cyhliu · Post by **cyhliu** » Sun May 16, 2004 8:51 pm

Ha ha ha, I was about to post a similar posting...

Cheers Josh, I think I know what you are doing and I was about the do the same...

Prash · Post by **Prash** » Sun May 16, 2004 8:52 pm

I measured 350mm from the top of the arch (end of lip) to the centre cap of the wheel, hope this helps

cyhliu · Post by **cyhliu** » Sun May 16, 2004 8:53 pm

Ha ha ha, I was about to post a similar posting...

Cheers Josh, I think I know what you are doing and I was about the do the same...

Prash, if you could do so, I'd appreciate it, cheers!

Prash · Post by **Prash** » Sun May 16, 2004 8:56 pm

so what are u upto then

?