part identification needed

Chat about your 9n Polo (inc GT and Fun)
Post Reply
User avatar
coupechamp
Getting There!
Posts: 63
Joined: Sun Sep 21, 2008 9:47 pm
Location: Northampton

part identification needed

Post by coupechamp »

Hi all,

need help with trying to find either a part number or the car it comes on as regard to the lower spoiler on my rear bumper. Had it knocked off at Rockingham (you can see it trailing in 2nd pic) and it's not that easy just going to the stealers as they want chassis numbers and number plate details ...for which this race car doesnt have. I have looked at some pics on here but a lot of the ones on here seem to be different, (dont stick out so much) compared to the one in the picture. I have a part number from ETKA: 6Q5807521 but it just shows a picture without much detail, maybe if you have it on your car you might be able to use your chassis number to gain the part number.

anyway, any info would go down well,

cheers all
Image
Image
User avatar
coupechamp
Getting There!
Posts: 63
Joined: Sun Sep 21, 2008 9:47 pm
Location: Northampton

Re: part identification needed

Post by coupechamp »

update, and how do you justify this price....
as post above explains, i was looking for the said trim, having been to the stealers and ordered what should have been the part (£20) it arrived only to be wrong, it was the whole bottom bit to the bumper in black. So another trip there and we finally found the right part, but.....are you sitting down........£174+ vat, so basically £200. yet theres no real difference in size and i'm sure how it's made, so it looks like i will be painting up the bottom of the origional bumper to look the part...... :evil:
User avatar
pip_polo
Bling Bling Diamond Member
Posts: 2454
Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:

Re: part identification needed

Post by pip_polo »

It's the lower Votex kit with an exhaust cut out isn't it?
dsw88
Bronze Member
Posts: 115
Joined: Sat Aug 30, 2008 7:17 pm

Re: part identification needed

Post by dsw88 »

you might aswell buy the full kit here mate he only wants £200 plus it has the rear spliter your after but will just need modding for your exhaust plus hes only in warwickshire not that far from Northampton >>> http://www.uk-polos.net/view ... de#p382498
User avatar
coupechamp
Getting There!
Posts: 63
Joined: Sun Sep 21, 2008 9:47 pm
Location: Northampton

Re: part identification needed

Post by coupechamp »

good spot, someone has asked to split, will see what he says. Gonna get a cost price for the spoiler tomorow and see what it comes out as..... :roll:
sep_rider
Getting There!
Posts: 70
Joined: Mon Mar 09, 2009 6:20 pm

Re: part identification needed

Post by sep_rider »

Yeh thats just a 'Votex' rear bumper spoiler, cant get them from dealers anymore as its discontinued and ££££! PM me a contact number if you need one bud.

S
User avatar
coupechamp
Getting There!
Posts: 63
Joined: Sun Sep 21, 2008 9:47 pm
Location: Northampton

Re: part identification needed

Post by coupechamp »

:D just pm'd cheers, Doug
POLOZ
Gold Member
Posts: 704
Joined: Fri May 09, 2008 6:20 pm

Re: part identification needed

Post by POLOZ »

What engine is in the Polo? :D
User avatar
coupechamp
Getting There!
Posts: 63
Joined: Sun Sep 21, 2008 9:47 pm
Location: Northampton

Re: part identification needed

Post by coupechamp »

2 Ltr N/A 20v. Basically 1.8T block bored to 2ltrs different crank, standard 20v Golf head, 210Bhp @6233 and 242Nm's @5809. Currently working on the 6 speed golf box as it just needs a bit more go out of the slower (3rd gear) corners. Poor little thing puts up a good fight against it's bigger sisters (MK5 GTi's) 230+ hp :evil: slight tech issues at last race at Rockingham but went from 23rd on grid up to 9th and still progressing forward before it lost an alternator belt, which lead to the race battery loosing uummpphh which resulted in engine power loss, oh the simple things in life... :?

Image
Post Reply