What camber degree?
What camber degree?
Fitting my new coil-overs in the next few days, obviously I'm going cause havoc with the camber, but I have a camber gauge! yay!!
my question is, what should I be setting the front camber at? I'm thinking -1.5.. Will that be too much??
my question is, what should I be setting the front camber at? I'm thinking -1.5.. Will that be too much??
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: What camber degree?
I personally think 1.5 will be too much, anything more than 1 degree is normally considered "too much".
1 degree would be fine though, mine was running at around 2 degrees negative when I had mine done and although it was immense handling it killed my tyres.
I got through a new set on the front in 1500 miles
1 degree would be fine though, mine was running at around 2 degrees negative when I had mine done and although it was immense handling it killed my tyres.
I got through a new set on the front in 1500 miles
Re: What camber degree?
Will I get 'scene points' and girls dropping their panties if I run what is considered 'too much' camber?6N2 GTI 00 wrote:I personally think 1.5 will be too much, anything more than 1 degree is normally considered "too much".
1 degree would be fine though, mine was running at around 2 degrees negative when I had mine done and although it was immense handling it killed my tyres.
I got through a new set on the front in 1500 miles
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: What camber degree?
Probably at shows dude but not for everyday driving 
Re: What camber degree?
So what do I need to do to my camber to get 'scene points' and girls dropping their panties on a daily basis?
-
emma_88
- Gold Member
- Posts: 798
- Joined: Tue Mar 03, 2009 10:49 am
- Drives: 6N2 Polo GTi & 9N3 Polo GTi
- Location: Maryport, Cumbria (North West)
Re: What camber degree?
Fair enough on the 'girls dropping their panties'... But do you really want / need 'scene points?'
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: What camber degree?
A lot of the scene peeps are Nobs to be fair
Re: What camber degree?
Nope, I was taking the p***... I'm not rich enough (read stupid) to spend loads on my car to get enough scene points.
and as for the pants dropping, I just like girls
On a more serious note. Will -1.0 be good, what's recommended from a standard point of view?
and as for the pants dropping, I just like girls
On a more serious note. Will -1.0 be good, what's recommended from a standard point of view?
Re: What camber degree?
I know its not in with the "Scene kids" but i thought these Specifications may help you dude.
These are the official ratings.
Front
Min: -0.83
Max: -0.17
Rear
Min: -2.00
Max: -1.34
Ive got the caster and toe for the front and the toe for the rear if you need them.
These are the official ratings.
Front
Min: -0.83
Max: -0.17
Rear
Min: -2.00
Max: -1.34
Ive got the caster and toe for the front and the toe for the rear if you need them.
Re: What camber degree?
Nice!!!
So I should aim for anything on between those values?
If you could get the caster/toe that would be ace!!
So I should aim for anything on between those values?
If you could get the caster/toe that would be ace!!
Re: What camber degree?
Yeh anything in between those two will do you well dear chap.
You'll struggle to get the toe on the rear i think but here is the info you need at least you can get it as close as.
Front
Toe
Min: -0.09
Max: 0.09
Caster
Min: 1.83
Max: 2.83
Rear
Toe
Min: 0.09
Max: 0.25
Hope thats of help to you dude.
You'll struggle to get the toe on the rear i think but here is the info you need at least you can get it as close as.
Front
Toe
Min: -0.09
Max: 0.09
Caster
Min: 1.83
Max: 2.83
Rear
Toe
Min: 0.09
Max: 0.25
Hope thats of help to you dude.
Re: What camber degree?
Love you! xxxBradley wrote:Yeh anything in between those two will do you well dear chap.
You'll struggle to get the toe on the rear i think but here is the info you need at least you can get it as close as.
Front
Toe
Min: -0.09
Max: 0.09
Caster
Min: 1.83
Max: 2.83
Rear
Toe
Min: 0.09
Max: 0.25
Hope thats of help to you dude.
Re: What camber degree?
Love you too xxx


