Im ste from Lancs i co-run Unphased VW Club i dont normally come on here but im gonna visit more often as im doing an airide setup so the help would be handy for ppl when i build my set up
plus theres some handy how to guides here
ok im sure i had a build thread on here! anyways here goes il bang a new one up. To who dont know ive had my 9n3 since it was new so thats 5 years. as you can see ive done a few nice touches through the years and im a fan of rare bits, shes just a 1.2s but im looking at engines in the near future as im still paying for it even after all this time!
My 9n3, OEM Rare bits
-
- Bronze Member
- Posts: 164
- Joined: Tue Jan 31, 2006 7:44 pm
- Location: Darwen, Lancs Drives: Polo mrk 7 1.2S
- Contact:
My 9n3, OEM Rare bits
Last edited by Ste-9n2 on Sat Nov 27, 2010 12:31 pm, edited 1 time in total.
-
- Bronze Member
- Posts: 164
- Joined: Tue Jan 31, 2006 7:44 pm
- Location: Darwen, Lancs Drives: Polo mrk 7 1.2S
- Contact:
Re: My 9n3, OEM Rare bits
Edition 38 2009
Bra fitted
9n rears fitted smoothed and tinted
grilles resprayed
All Types 2010
GTI faces
R32 Pedals
Cumbria VAG 2010
EDITION 38 (apparently i got in top 3 polos but i come home early!
-
- Bronze Member
- Posts: 164
- Joined: Tue Jan 31, 2006 7:44 pm
- Location: Darwen, Lancs Drives: Polo mrk 7 1.2S
- Contact:
Re: My 9n3, OEM Rare bits
Airbags......
and an MOT fail ive ordered Seat Cupra bushes
Re: My 9n3, OEM Rare bits
Noice...What size wheels you got on? And how much are you lowered by? I think it looks really good!
Re: My 9n3, OEM Rare bits
How much was your car lowered by? What did you use?
Im looking to lower my 9n3 on 17inch 215/40/17's but I need help bad!
Im looking to lower my 9n3 on 17inch 215/40/17's but I need help bad!
Re: My 9n3, OEM Rare bits
Love this! Very cool indeed
-
- Bronze Member
- Posts: 164
- Joined: Tue Jan 31, 2006 7:44 pm
- Location: Darwen, Lancs Drives: Polo mrk 7 1.2S
- Contact:
Re: My 9n3, OEM Rare bits
Thanks
17`s
that tyre size sounds a bit wide to be honest mate id use either 205 or 195 on a 40 profile
not sure how much mines lowered i just winded it down!
17`s
that tyre size sounds a bit wide to be honest mate id use either 205 or 195 on a 40 profile
not sure how much mines lowered i just winded it down!