Brakes size

[g__humm]

What are they on a pd100? Cheers missues wants new ones on front

[88rsr]

250 summet cant remember the exact figure but its in the 250s

[g__humm]

Kk so I need 288 hubs yeah. What off? Like golf or does it have to be polo based

[88rsr]

yeah if you want 288 you need either polo gt, fabia vrs or ibiza fr hubs, although tbh im not sure if anyones had a look at mk4 golf/bora platform hubs, you could be onto the biggest break through here if theyre anything like as its a million times easier to find mk4s in a scrappy than any of the others, if i get a chance sometime soon i'll jack our lasses polo and my dads bora up and compare the front hubs

[g__humm]

Cheers mate.

[Dub_Dan]

sorry to jack the thread g_humm 312mm on my pd100 can it be done? what is required? and do i need to change the fronts?

[g__humm]

Ur car is the same as my gf so it can but just trying to find out what hubs are needed

[88rsr]

as said dan your in the same boat, you need the front hubs changing, as you'll have 256s on, but instead of the 288 carriers you need to get hold of the right ones for 312, you cant run no smaller than 16" with 312s so itd be wise to get a 16" spare too

[K.I.T.T.]

It's the hub carriers, not the hubs themselves that differ. I've looked into this as it's on my "to do" list.

And no, the Golf/Bora setup won't fit.

Ash

[Dub_Dan]

cheers fellas!

[88rsr]

It's the hub carriers, not the hubs themselves that differ.

yeah that, i knew what i meant haha, fairy snuff about the golf/bora ones looks like its hunting for the ibiza and fabia ones then as theyre a fair bit more common than a polo gt, not that i have to i mean but the guys looking at doing it

[K.I.T.T.]

Most of you guys probably know this, but the Mk7 Polo GTI has them as well, but (thankfully) not many are being broken just yet.

Ash