Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Chat about your 9n Polo (inc GT and Fun)
des_pd_ tdi
Gold Member
Posts: 568 Joined: Mon Nov 18, 2002 5:17 pm
Location: London
Post
by des_pd_ tdi » Fri May 21, 2004 2:33 pm
Wai_Mak wrote: correct me if i am wrong... but taking the plastic cover off will lose your air box and filter... which is not good!!????
No that's Ok, he's only talking about the plastic shielding around the engine, this is not connected to the airbox.
des
Nelson_Wilbury
Moderator
Posts: 1638 Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk
Post
by Nelson_Wilbury » Fri May 21, 2004 5:32 pm
The main problem I'm having fitting it is the ECU, I think on the TDi's they are mounted in a different place? I never actually fitted it properly because the ECU prevented it, I just lined it up
POLO9NTDI
New
Posts: 12 Joined: Fri May 21, 2004 12:51 am
Location: Portugal
Post
by POLO9NTDI » Sat May 22, 2004 11:03 pm
Hello again,
It´s a shame Nelson
my ECU it´s in the right side of the car and no problem at all.
I only have to dismount one piece in the top of a suspension tower (left) and run...
I mounted the bar in a Seat dealer
Nelson_Wilbury
Moderator
Posts: 1638 Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk
Post
by Nelson_Wilbury » Sat May 22, 2004 11:20 pm
Yeah, the FSi has a different ECU bracket and theres no way it'll fit
KarlM
Bling Bling Diamond Member
Posts: 2353 Joined: Mon Oct 14, 2002 11:11 pm
Location: Sheffield
Contact:
Post
by KarlM » Sun May 23, 2004 12:23 am
admittedly I havent seen the bays... but could you not relocate the ECU with a TDi bracket? Your warrenties invalid if you fitted that chip anyway...
Nelson_Wilbury
Moderator
Posts: 1638 Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk
Post
by Nelson_Wilbury » Sun May 23, 2004 9:43 am
It's no good if the ECU won't fit in the bracket. If its different its probably different for a good reason.
carmadaaron
Bling Bling Diamond Member
Posts: 4350 Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland
Post
by carmadaaron » Sun May 23, 2004 11:02 am
is your location of the ECU the same for all petrol engined 9Ns?
Nelson_Wilbury
Moderator
Posts: 1638 Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk
Post
by Nelson_Wilbury » Sun May 23, 2004 3:39 pm
Same general location, but it the FSi ECU is bigger and so the bracket sticks out a bit more...
Compare my old 1.2 with Petrifieds FSi engine shot earlier in the thread...
POLO9NTDI
New
Posts: 12 Joined: Fri May 21, 2004 12:51 am
Location: Portugal
Post
by POLO9NTDI » Sun May 23, 2004 9:50 pm
Yes, your ECU seems to be bigger than the rest of ECU's
You have to sell the car and buy a TDI
Nelson_Wilbury
Moderator
Posts: 1638 Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk
Post
by Nelson_Wilbury » Sun May 23, 2004 10:27 pm
POLO9NTDI wrote:
You have to sell the car and buy a TDI
No way!
FSi rules my world!
carmadaaron
Bling Bling Diamond Member
Posts: 4350 Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland
Post
by carmadaaron » Mon May 24, 2004 3:57 pm
lol, hows your new chip going anyway?
DJ
Bronze Member
Posts: 167 Joined: Mon Jun 16, 2003 12:18 pm
Location: Hong Kong
Post
by DJ » Wed May 26, 2004 4:02 pm
Guys..
Is it possible to fit into a 1.4 16V 100ps, other than Seat is there any other OEM/aftermarket product available?
cacatous
New
Posts: 24 Joined: Tue Mar 23, 2004 3:13 pm
Post
by cacatous » Tue Jun 01, 2004 10:50 am
Will it fit on my 1.2 65hp Twist?
I'll buy it from whoever was selling it if it does!