Endi_GTI's GTI: Typhoon Shlurpie carnage

[Endi_GTI]

Rear Upper strut brace painted and fitted Has made more a difference than i expected. However it now makes the front end seem a lot more sloppy now, so i am thinking of getting a front OMP one now to balance it out. few pictures. Looks like a little rally car inside now





Shame its not a 3 door, would look better i think

[6N2 GTI 00]

Looking good Matt nice choice having it sprayed red too

How much did it cost you mate? and does the guy on Club Polo sell them on a regular basis?

[alexperkins]

Id be interested to see if those race harnesses pass an MOT lol

As for the brace, it looks good.

OMP upper front makes a world of difference - totally recommend it.

The only problem with the rear struts being bolted together is it doesnt help the chassis a great deal. More so, it prevents the struts from moving in their bushes, therefore making axle movement stiffer.

[Endi_GTI]

How much did it cost you mate?

Cheers Ben, glad you like it. Well the bar was £40 and the spray up..... not sure yet. It's a family friend so i doubt it is a lot. Its flash red the same as the car Think the guy on club polo does do quite a few of them. Think there is a new list being filled at the moment.

d be interested to see if those race harnesses pass an MOT lol

Ha ha thanks alex. Iv asked a few of the MOT testers at work and they say it shouldn't be a problem. They are the road legal ones. The 4 points with the swivel buckels however are not street legal but are safer How did they come up with that one? lol

Defiantly think an upper front OMP is near the top of the list

[Endi_GTI]

First proper clean this year for the VW's yesterday. Bit of AG's super resin polish followed by AG's HD Wax. Defiantly needed it

[6N2 GTI 00]

Looking very nice mate

What plans have you got for wheels? you going to stick with the standard splits or change for some wide boys?

[Endi_GTI]

Cheers Ben

Well I'm thinking of keeping the splits but get them refurbed and some spacage on them. Maybe 15 - 20mm on the back and 5 on the front.

I was however thinking about getting some 16' BBS RCs like the ones on the 25th anniversary golf. Think they would look quite good. But for now get the RXIIs spruced up for summer

[6N2 GTI 00]

Cheers Ben

Well I'm thinking of keeping the splits but get them refurbed and some spacage on them. Maybe 15 - 20mm on the back and 5 on the front.

I was however thinking about getting some 16' BBS RCs like the ones on the 25th anniversary golf. Think they would look quite good. But for now get the RXIIs spruced up for summer

Sounds good matt

I'm liking the idea of the spacers, got the same planned for mine this year too.
15-20mm rears and 5-10mm on the fronts, i'm going for slightly wider wheels too with a set of Ronal LS rims which are 15x7J.

The RXII's look awesome anyway and keep the OEM look which is cool.

Ordered myself a Rear strut brace today off clubpolo he's preparing a new batch so I look forward to receiving that one.
Already got an OMP front brace so I just need a Whiteline Rear ARB to complete the handling

Here's a link to the ARB's if your interested in getting them

Front Anti Roll Bar - MK5 6N2 (21mm) -
http://www.venommotorsport.com/product_ ... Suspension

Rear Anti Roll Bar - MK5 6N2 (22mm) - http://www.balancemotorsport.co.uk/prod ... mber=98805

[Godderz23]

15-20mm rears and 5-10mm on the fronts, i'm going for slightly wider wheels too with a set of Ronal LS rims which are 15x7J.

I thought the LS' were 7.5J??

Car looks gleaming dude, SRP is my favorite autoglym product. You going to do the RX2's the original colour or something different like i've done?

[6N2 GTI 00]

Your right dude they are my bad

195/45/15's should give them a nice look, slight stretch but nothing drastic

[Endi_GTI]

Cheers Ben, i have been looking at these but first i think i will sort some spacers, the RXIIs and an exhaust out. Oh and a front OMP upper because it looks cool Would be interesting to see how much more difference those ARBs will make. Probably a lot. Good news about the Club Polo brace. What colour are you going to go for? I have noticed quite a noticeable difference with it fitted. I paid £20 for the painting in the end which i don't think is too bad. Some Ronal LS alloys will look awesome mate

You going to do the RX2's the original colour or something different like i've done?

Think i will do them in the standard colour mate. Have been thinking of doing something like yours but i don't think it would work as good with a red car. I don't think full black looks very nice either. Thanks for the praise mate really appreciate it SRP is really good stuff. The High definition wax is also really good. Seems to last quite well.

[6N2 GTI 00]

Cheers Matt
i'll probably spray it red mate to match the front OMP brace, red looks awesome

[Endi_GTI]

red looks awesome

Yeah that will look really good mate I found that mine needed a bit of persuasion on but nothing a file wont sort out

[Mr Blobby]

Car is looking sweeeeet!

I made my own rear strut brace was eeeeeeasy... Fits perfectly aswell so am really happy with it!

By the way, I want first dibbs on your bucket seats if you ever sell them pretty please?

[Endi_GTI]

By the way, I want first dibbs on your bucket seats if you ever sell them pretty please?

Ha ha ok mate i'll remember that for the future, but not planning on getting rid of them any time soon

Cheers for the positive comment though, means a lot

When are you getting a build thread up for yours?