G40 arches....

Chat about your MKIII (86C) inc GT/G40 Polo
Post Reply
LOW PHAT SPREAD
Bronze Member
Posts: 181
Joined: Tue May 13, 2003 11:56 am
Location: East Yorkshire

G40 arches....

Post by LOW PHAT SPREAD »

Got pulled by Police 2day bout my wheels sticking out 2 much! Think I may av 2 get sum G40 arches 2 cover them. Do they fit straight on2 mine ok? Any pictures of a G40 wiv them so I can see wot I am gunna be needin, ta. (Wot I wanna know is can I just av the arches or will I have 2 have the side strip aswell?)
:)
dub envy
Moderator
Posts: 1431
Joined: Mon Jun 16, 2003 10:52 pm
Location: Dan Saaf Drives: Pirelli ed. Coupe

Re: G40 arches....

Post by dub envy »

LOW PHAT SPREAD wrote:Got pulled by the Police today about my wheels sticking out too much! Think I may have to get some G40 arches to cover them. Do they fit straight onto mine ok? Any pictures of a G40 with them, so I can see what I am going to be needing, ta. (What I want to know is can I just have the arches, or will I have to have the side strip aswell?)
There you go... I fixed your post for you. Much easier to read now.

ok, so GT/G40 are the same. You can just put the arches on, but that willleave you with a hole in your front arch as the door strip is moulded into it. The easiest solution is to fit the whole lot.

Image
LOW PHAT SPREAD
Bronze Member
Posts: 181
Joined: Tue May 13, 2003 11:56 am
Location: East Yorkshire

Post by LOW PHAT SPREAD »

Sorry always forget you dont like 'textin language'!!
Cheers for the information
:)
ereeiz
Bronze Member
Posts: 109
Joined: Wed Feb 11, 2004 4:35 pm
Location: Worcester

Post by ereeiz »

look here for pictures of the individual arches

http://search.ebay.co.uk/g40_Automotive ... propertyZ1

A bit pricey imo!
Karl_CLCoupe
Platinum Member
Posts: 1131
Joined: Thu May 06, 2004 11:43 am
Location: Southport AKA: Mr Sambuca
Contact:

Post by Karl_CLCoupe »

So is that all you need the arches? Or are there aany other little bits to help fix em to the wings?

Thanks.

Karl.
D4V1D
Bronze Member
Posts: 163
Joined: Fri Dec 12, 2003 7:16 pm
Location: feltham
Contact:

Post by D4V1D »

sure is, there are some revits that attach it to the wing, youd want the skirt along the bottom as well to fill in that gap that u can see from those pics
Post Reply