Need help fitting LCR splitter on 9n

[Ladiesman_317]

Hi, i just popped down the local seat dealer, and bought a lcr splitter, set me back £37!
Anyway, now that ive got it, i have no clue on how to fit it.... was hoping for a guide or something similar, any ideas?
Thanks guys.

[blazeguarder]

I've been meaning to do this to my 9N3 but I haven't got a chance to yet.

It isn't a direct fit, so you need to get some self tapping screws or nuts/bolts etc in order to fit it to the front valance. It apparently also needs cutting slightly as it's a bit too long. It might also be a bit too wide so needs cutting slightly to bend it to fit the Polo.

I was planning on removing the front valance and fitting the LCR splitter to it and then refitting it to the car, as it looks like it'll be quite difficult to fit with the valance on the car.

Hope this is of some use.

[Ladiesman_317]

Does anyone happen to have any pictures of 9n's with lcr splitters on? i think ive only seen one on this forum. Ive seen a few on golfs and corsas with it on.
Thanks.

[dsw88]

i've got one fitted on mine

i removed the bumper and fitted it with self tappers then trimmed the edges back as its too long to fit on the 9n's bumpers

[Ladiesman_317]

Haha, i was on about your car, and i think i saw a red 9n with black alloys and a lcr splitter. Yours looks really nice, how much is it lowered, and what size are the alloys?
thanksss

[dsw88]

dont know how much its lowered by but still can go lower on the coilovers if i wished too, alloys are 17"