I was thinking about getting some Borbet A's after I lower my car and was wondering, Id need to get the same tire size as you im guessing as they are 16" as well?
Endi_GTI's GTI: Typhoon Shlurpie carnage
-
Mr Blobby
- Silver Member
- Posts: 374
- Joined: Mon Jan 10, 2011 11:03 pm
- Location: Portsmouth, Hampshire.
Re: Endi_GTI's GTI
Those wheels are going to look amazing! And a bit of stretch to carry on the wheel arches will look sweet 
I was thinking about getting some Borbet A's after I lower my car and was wondering, Id need to get the same tire size as you im guessing as they are 16" as well?
I was thinking about getting some Borbet A's after I lower my car and was wondering, Id need to get the same tire size as you im guessing as they are 16" as well?
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: Endi_GTI's GTI
Cheers dude, yeah they are 16" ones. Hope they look nice and do not rub too much. Will get the rubber sorted as soon as i canMr Blobby wrote:m guessing as they are 16" as well?
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: Endi_GTI's GTI
Loving the new wheels Matt, I bet you cant wait to get cracking on the refurb now.
Reference the Tyres the 195/40/R16's should be spot on, thats what I run on mine and the RXII's are only 6.5J
Reference the Tyres the 195/40/R16's should be spot on, thats what I run on mine and the RXII's are only 6.5J
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: Endi_GTI's GTI
Thanks Ben, so i guess mine would then be stretched but yours are not? Im not to good on the tyre side6N2 GTI 00 wrote:Loving the new wheels Matt, I bet you cant wait to get cracking on the refurb now.
Reference the Tyres the 195/40/R16's should be spot on, thats what I run on mine and the RXII's are only 6.5J
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: Endi_GTI's GTI
Yeah you would have a nice stretch on yours but it would still be practical.
The 16" RXII's are off the MK3 anniversary edition Golf GTI's which run 205/45/R16's as standard so I suppose I am running a slight stretch but it isnt really noticeable.
195's are perfect for 6.5/7.5J wheels
The 16" RXII's are off the MK3 anniversary edition Golf GTI's which run 205/45/R16's as standard so I suppose I am running a slight stretch but it isnt really noticeable.
195's are perfect for 6.5/7.5J wheels
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: Endi_GTI's GTI
Cool thanks Ben. They have 195's on at the minute and look slightly stretched but are on a 45 profile. Can't wait to get them on. I may wait until the winter with the refurb and just use them now 
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: Endi_GTI's GTI
SweetEndi_GTI wrote:Cool thanks Ben. They have 195's on at the minute and look slightly stretched but are on a 45 profile. Can't wait to get them on. I may wait until the winter with the refurb and just use them now
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: Endi_GTI's GTI
Pretty annoyed with this bloody pile of s**t today. Nothing but problems. AGAIN! List of what needs doing:
- Insurance at the end of the month (Quoted around £800)
- Full Service needs doing
- Cam belt needs replacing
- Water Pump may as well be changed whilst im there
- Coolant temp sensor (On back order
)
- 4 new tires for the RC's (may have to wait)
- Coolant temp sensor for the 6N2 1.0
Just drove home now and it seems like the off side CV joint is going!!!!
It is either that or the wheel bearing. On full lock it will go knock knock knock knock knock
So add to the list:
- CV joint (hopefully)
- New Boot again
Just taxed it at £215!!!!!!!!!!!!
As you can tell im really enjoying being a Polo GTi owner at the moment
- Insurance at the end of the month (Quoted around £800)
- Full Service needs doing
- Cam belt needs replacing
- Water Pump may as well be changed whilst im there
- Coolant temp sensor (On back order
- 4 new tires for the RC's (may have to wait)
- Coolant temp sensor for the 6N2 1.0
Just drove home now and it seems like the off side CV joint is going!!!!
So add to the list:
- CV joint (hopefully)
- New Boot again
Just taxed it at £215!!!!!!!!!!!!
As you can tell im really enjoying being a Polo GTi owner at the moment
Re: Endi_GTI's GTI
Been there......
But once its done you'll love it again. Mine's staying for as long as possible, might buy a trailer for it instead of getting a work van
But once its done you'll love it again. Mine's staying for as long as possible, might buy a trailer for it instead of getting a work van
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: Endi_GTI's GTI
The knock knock noise does sound very much like a CV joint mate.
Dont get too dishearted though matt, we have all been there too.
I got to work this morning only to find a massive split in my tyre wall (almost brand new tyre as well)
Dont get too dishearted though matt, we have all been there too.
I got to work this morning only to find a massive split in my tyre wall (almost brand new tyre as well)
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: Endi_GTI's GTI
Bad times 
Will spend a few days at work on it next week and get it back up to working condition. Maybe even get some new rubber
Will spend a few days at work on it next week and get it back up to working condition. Maybe even get some new rubber
Re: Endi_GTI's GTI
I neet a new CV Joint on mine, its been split for well over a year
Also need a new engine mount at some point
Also need a new engine mount at some point
Re: Endi_GTI's GTI
Endi_GTI wrote:Pretty annoyed with this bloody pile of s**t today. Nothing but problems. AGAIN! List of what needs doing:
- Insurance at the end of the month (Quoted around £800)
- Full Service needs doing
- Cam belt needs replacing
- Water Pump may as well be changed whilst im there
- Coolant temp sensor (On back order)
- 4 new tires for the RC's (may have to wait)
- Coolant temp sensor for the 6N2 1.0
- CV joint (hopefully)
- New Boot again![]()
Just taxed it at £215!!!!!!!!!!!!![]()
As you can tell im really enjoying being a Polo GTi owner at the moment
sorry to hear of all the problems. really sucks when things go wrong/money needs to be spent on unfun things (eg.tax) specially when it all comes at once!
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: Endi_GTI's GTI
Thanks for the sympathy Verity
I guess that these cars are starting to show their age a bit. Mine is coming up for 11 years in july 
Re: Endi_GTI's GTI
compare them to say a saxo though, they dont even really last longer than 5 years before they are fit for scrap, these polos are getting on a bit but they are far from headed to any scrap yard.



