SooperDR's - Build Thread!!
-
andrewsyme
- New
- Posts: 25
- Joined: Mon Jul 25, 2011 6:15 pm
Re: SooperDR's - Build Thread!!
hi mate where did you get your rear brake discs from, aswell as the front disks pads etc, do you have links to the seperate parts by any chance?
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
Sure, no worries! I got the Rear Brembo Brake Pads and Discs from here:
http://www.ebay.co.uk/itm/Rear-Brembo-B ... 1291wt_905
http://www.ebay.co.uk/itm/REAR-Brembo-B ... 1439wt_905
I got all the rest of the parts from Venom Motorsport:
http://www.venommotorsport.com/
These are the Discs I have:
http://www.venommotorsport.com/product_ ... gory=Brake
And these are the EBC Redstuff Pads:
http://www.venommotorsport.com/product_ ... gory=Brake
http://www.ebay.co.uk/itm/Rear-Brembo-B ... 1291wt_905
http://www.ebay.co.uk/itm/REAR-Brembo-B ... 1439wt_905
I got all the rest of the parts from Venom Motorsport:
http://www.venommotorsport.com/
These are the Discs I have:
http://www.venommotorsport.com/product_ ... gory=Brake
And these are the EBC Redstuff Pads:
http://www.venommotorsport.com/product_ ... gory=Brake
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - New Photos!
She's taken her time, but finally she is down off the jacks!
Here's a few pics of her on the Driveway:



Let me know what you think!
Here's a few pics of her on the Driveway:



Let me know what you think!
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
Final Stage of this part of the Build:
4 Wheel Laser Alignment:

Guy was pretty impressed, wasn't too far out.. Just needed a few tweeks..

4 Wheel Laser Alignment:

Guy was pretty impressed, wasn't too far out.. Just needed a few tweeks..

- Trottagti
- Bling Bling Diamond Member
- Posts: 2050
- Joined: Mon Feb 04, 2008 7:58 pm
- Location: Chelmsford, Essex.
Re: SooperDR's - Build Thread!!
Yeah I like it, looks much better.
How's the drive with the bushes in as I'm fitting mine next week hopefully but rear axle ones aswell from polybush.
Any bodywork plans? Think black side repeaters and color code front splitter would look proper.
How's the drive with the bushes in as I'm fitting mine next week hopefully but rear axle ones aswell from polybush.
Any bodywork plans? Think black side repeaters and color code front splitter would look proper.
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: SooperDR's - Build Thread!!
Looks very nice mate, cant beat a black GTI 
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
Cheers!Trottagti wrote:Yeah I like it, looks much better.
How's the drive with the bushes in as I'm fitting mine next week hopefully but rear axle ones aswell from polybush.
Any bodywork plans? Think black side repeaters and color code front splitter would look proper.
Yeah, she does look much better now! Haven't had much chance to hit the Twisty's but she does feel sharp in the corners!
Thinking of Smoked Side Repeaters yeah! How do you Colour Code the Front Splitter?
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
Cheers! Yeah Agreed!6N2 GTI 00 wrote:Looks very nice mate, cant beat a black GTI
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
January Update:
After a few months in the Garage she's out for a Full Service.
Oil and Filter Service - (Genuine VW Parts)
Spark Plugs
K&N Air Filter had a Clean and Oiled
Cambelt and Auxillary Belt Change - Gates Powergrip Cambelt Kit and Auxillary Belt Replaced - (Including Tensioners and Idler Pulleys)
Coolant and Water Pump Service - Flushed and Drained - New Water Pump
'Duxback' Windscreen Treatment - (Like Rain-X) Windscreen and Side Windows Treated
Brand New Genuine VW Polo GTi Carpet Mats
After a few months in the Garage she's out for a Full Service.
Oil and Filter Service - (Genuine VW Parts)
Spark Plugs
K&N Air Filter had a Clean and Oiled
Cambelt and Auxillary Belt Change - Gates Powergrip Cambelt Kit and Auxillary Belt Replaced - (Including Tensioners and Idler Pulleys)
Coolant and Water Pump Service - Flushed and Drained - New Water Pump
'Duxback' Windscreen Treatment - (Like Rain-X) Windscreen and Side Windows Treated
Brand New Genuine VW Polo GTi Carpet Mats
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
Looking for a New Home..
She'll be looking for a new home very soon.. Anyone Interested?
Anybody sold 1 of these lately? PM me with values these have sold for?
She'll be looking for a new home very soon.. Anyone Interested?
Anybody sold 1 of these lately? PM me with values these have sold for?
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: SooperDR's - Build Thread!!
How come your selling up mate?
What mileage is it on?
What mileage is it on?
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
It was Registered 03/03/2000 and it has a Fully Serviced 77,000 Miles on the Clock.
TBH, I really don't want to sell.. But I have to have a company car and I don't think I can afford to keep running both!
TBH, I really don't want to sell.. But I have to have a company car and I don't think I can afford to keep running both!
Re: SooperDR's - Build Thread!!
where abouts did you get it 4 wheel alined??
im local to you but i wasnt that happy with the last place that did it so looking for somewehere else!!
Cheeers Mark
im local to you but i wasnt that happy with the last place that did it so looking for somewehere else!!
Cheeers Mark
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: SooperDR's - Build Thread!!
Fair point mateSooperDR wrote:It was Registered 03/03/2000 and it has a Fully Serviced 77,000 Miles on the Clock.
TBH, I really don't want to sell.. But I have to have a company car and I don't think I can afford to keep running both!
Always a shame to sell your pride & joy but its expensive enough to keep one car on the road let along two
- SooperDR
- Getting There!
- Posts: 57
- Joined: Mon Aug 01, 2011 3:24 pm
- Location: BECKENHAM, London/ Kent. Drives: 6N2 Polo GTI - Black - 3Dr.
Re: SooperDR's - Build Thread!!
I get mine done at STS Tyre Pro in Bromley Common. (Used to be called RSR).markyc wrote:where abouts did you get it 4 wheel alined??
im local to you but i wasnt that happy with the last place that did it so looking for somewehere else!!
Cheeers Mark
Carl, the boss, has always done a fantastic job for me.
GTi goes arrow straight and the steering wheel is bang on straight ahead too!


