Endi_GTI's GTI: Typhoon Shlurpie carnage

Chat about your MKV (6N2) Polo GTi
User avatar
P mk4
Bronze Member
Posts: 243
Joined: Sun May 01, 2011 5:35 pm
Location: Plymouth

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by P mk4 »

Really like them on your car mate think they suit it better than what we expected :)

Sadly cant go any lower on the front and if you go lower on the back you might be repping a reverse rack haha :)

Your set up isnt made for lows with the spax coilovers its more for handling as you no dont go cutting springs or do anything to get it low i like the ride height maybe a couple mill on the back have to look into it :) and compared to the rest of us with budget coilovers you hammer us round corners haha
User avatar
Ashcroft
Gold Member
Posts: 959
Joined: Sun Oct 16, 2011 5:51 pm
Location: Plymouth, Devon

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by Ashcroft »

Looking good mate sit well on the ronals I think it's worth tryin the 10mm on the rear
User avatar
Endi_GTI
Gold Member
Posts: 940
Joined: Fri Oct 22, 2010 8:00 pm
Location: Plymouth, UK, Drives Polo 6N2 GTI

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by Endi_GTI »

Thanks for the comments :D

I would love to drop it a little more but as Phillip said its on the bottom of the winders on the front so thats it :cry: I'm not taking the helpers out as that defeats the object of having expensive coilovers. I do think a little less poke would look better so that will be the next thing. Im really happy with how it looks and I think its nice to have a change now and again. Keeps the love up on the car as i was getting a bit annoyed with it. So I will be swapping between wheels to suit the conditions/mood haha
User avatar
P mk4
Bronze Member
Posts: 243
Joined: Sun May 01, 2011 5:35 pm
Location: Plymouth

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by P mk4 »

Changing wheels to your mood hmmmm I think you should buy the Ronal teddy wheels but instead of a teddy just a capital C in the middle would suit your driving dear ;) winnerrrrrrrr
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by 6N2 GTI 00 »

Looks great Matt :) I love Ronal LS wheels on the GTI, just looks spot on!

I'm not a massive fan of the red centres but they still look good, did you buy them with tyres too?
User avatar
Endi_GTI
Gold Member
Posts: 940
Joined: Fri Oct 22, 2010 8:00 pm
Location: Plymouth, UK, Drives Polo 6N2 GTI

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by Endi_GTI »

6N2 GTI 00 wrote:Looks great Matt :) I love Ronal LS wheels on the GTI, just looks spot on!

I'm not a massive fan of the red centres but they still look good, did you buy them with tyres too?
Cheers Ben. Yup came with some T1R's all round but Phil has scrubbed them out pretty well but should do the rest of the summer. Im really happy with how it looks at the moment. Next things are bodywork, K&N Typhoon (Sounds way better) and fit the manifold & G60 breaks as there almost worn out and then follow on with exhaust. However motorbike test first so i can use my KTM ha.

More pictures soon
User avatar
Ashcroft
Gold Member
Posts: 959
Joined: Sun Oct 16, 2011 5:51 pm
Location: Plymouth, Devon

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by Ashcroft »

Cos my K&N is taste and you love it every time I blast past you ;-)
User avatar
Endi_GTI
Gold Member
Posts: 940
Joined: Fri Oct 22, 2010 8:00 pm
Location: Plymouth, UK, Drives Polo 6N2 GTI

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by Endi_GTI »

Ashcroft wrote:Cos my K&N is taste and you love it every time I blast past you ;-)
I'll give you that but then when i undertake you round a corner you think my spax is taste ;) red = lit :mrgreen:
User avatar
Ashcroft
Gold Member
Posts: 959
Joined: Sun Oct 16, 2011 5:51 pm
Location: Plymouth, Devon

Re: Endi_GTI's GTI: RONAL TASTENESS

Post by Ashcroft »

yes i want spax!!!! but i also like the lows with my new wheels ;)
User avatar
Endi_GTI
Gold Member
Posts: 940
Joined: Fri Oct 22, 2010 8:00 pm
Location: Plymouth, UK, Drives Polo 6N2 GTI

Re: Endi_GTI's GTI: Edition 38 Video

Post by Endi_GTI »

Need to update this. Have done a few little jobs but for now take a look at this little edit of my Edition 38 weekend please. Its nothing amazing but you get the idea 8)

User avatar
Godderz23
Platinum Member
Posts: 1320
Joined: Mon Mar 29, 2010 8:11 pm
Location: Exeter
Contact:

Re: Endi_GTI's GTI: Edition 38 Video

Post by Godderz23 »

Wow, that's an awesome video dude.

Such an awesome weekend!
User avatar
Bradley
Gold Member
Posts: 974
Joined: Thu Jul 16, 2009 5:51 pm
Location: Kent

Re: Endi_GTI's GTI: Edition 38 Video

Post by Bradley »

Thats a Rad little video dude,shame i couldn't head up and meet you lot.
User avatar
Endi_GTI
Gold Member
Posts: 940
Joined: Fri Oct 22, 2010 8:00 pm
Location: Plymouth, UK, Drives Polo 6N2 GTI

Re: Endi_GTI's GTI: Edition 38 Video

Post by Endi_GTI »

Thank you kindly both of you. It is a shame you couldn't have come up Bradley. Next year for sure 8)
Joycey
Bronze Member
Posts: 107
Joined: Fri Mar 23, 2012 8:45 pm

Re: Endi_GTI's GTI: Edition 38 Video

Post by Joycey »

that video is taste, you can even see my fluttervalve at the right angle :wink:
User avatar
Moosegirl
Gold Member
Posts: 679
Joined: Tue Aug 02, 2011 7:45 pm
Location: Newcastle Upon Tyne
Contact:

Re: Endi_GTI's GTI: Edition 38 Video

Post by Moosegirl »

Class video! 8)

Lukes three spokes actually look really good moving! Apologies for the abuse about them Luke! Hahaha :wink:
Post Reply