Headlights
Before Edition I spent a whole day sanding down my headlights. I stripped the lights off the car by the usual bumper drop. I started wet sanding on 500 grade as the lights were so bad:
I then went through to 800, 1000, 1200, 1500, 2000, 2500. Then completed with a plastic machine polish, super resin polish and sealed with a HD Wax. They are as good as new now. Really happy with the outcome and worth the 8 hours of labour
ABS PUMP
I have been battling with my ABS for well over a month now. The light was on the dash as soon as i sensed the car rolling. So i did the re soldering of the ABS module which seems to have worked. However taking a stanley knife and hack saw to the module was a little scary:
A few pictures at edition and before edition showing her at her best this year. Looking good on the Ronals.
Wheels
So now winter is here the BBS RC's are back on but I have also welcomed a new set of wheels to the collection that Phil has been rolling on. A set of Borbet T's in 14 inch 8J wide. So that is now 4 sets of wheels i have
I was also driving along the other day and a shiney something flew up over the windscreen got home to find this:
All has been replaced not though
I am also borrowing Phils headlight protectors over the winter months so my hard work is not undone by the horrid elements out there. More updates to follow later on this winter.
And my puppy Mutley loves the polo:
maybe me and Matt should do a road trip to poole... 4 red Gti's then!
