Bluemotion Splitters MKVI/MKVII/9N3

[PollyGTI]

any fitted a bluemotion splitter from the 9N3 (front and rear) to a polo 9N

how easy was it and any pictures?

thanks, Jackkk

[K.I.T.T.]

Well the front splitter blatantly isn't going to fit a 9n is it?

Ash

[PollyGTI]

explain how ? Is it not just a lip that goes in place of the original black bit from the original bumper ??

[Ben90]

The Bluemotion front splitter won't fit on a 9n, since the 9n3 is a face-lift and has a different front bumper/bonnet/wings etc. Nearly everything behind the front wheels is the same; meaning that side skirts, rear valances and roof spoilers can be fitted to either 9n or 9n3 with no problems.

Hope this helps

[PollyGTI]

I assumed splitter meant just the bottom lip, and I know that the bottom lip would fit the 9N... Thanks for the help guys

[Ben90]

You may be talking about the Votex kit for the 9n. There was no 9n bluemotion but there was a 9n3 one, so the bluemotion front lip/splitter will only fit a 9n3.

Bluemotion lip on a 9n3


Votex lip on a 9n


Looking at them together they're actually pretty similar But they aren't interchangeable between models.

Hope this helps!

[Ladiesman_317]

Well the front splitter blatantly isn't going to fit a 9n is it?

Ash

Lollll ANGRY ASH!

[PollyGTI]

can you see where the line is just below the plastics on the bluemotion 9N3? when it said "splitter" i thought it meant that that specific piece of the bumper would be able to come seperate from the whole bumper. this is why i thought that it could be possible to put it on the 9N... my mistake, thanks for the help guys