Black Polo GTI 6 Speed. 390 BHP Build

[9N3 Turbo]

any pics of this as it is at the moment and with the dunes on pal?

Not at the moment. Currently it's sitting on the dunes on the rear and axle stands at the front with no hubs whilst I sort out the brakes. Whit Christmas and the cold weather I've been very lazy. But I have all the parts now so will start sorting it out very soon.

[GTi_Red]

Got these over the weekend

312mm fronts

hi
do the standard carrier bolts fit?

[9N3 Turbo]

Got these over the weekend

312mm fronts

hi
do the standard carrier bolts fit?

Yes they do
Not sure what pads you're going to use but I used Tarox Corsa pads and they worked great in cold and even better when warm/hot

[GTi_Red]

so its a worth while upgrade? you can get recon calipers and carriers with new discs and pads for 275 in red, if its a good upgrade then seems a bit of a bargin

[9N3 Turbo]

so its a worth while upgrade? you can get recon calipers and carriers with new discs and pads for 275 in red, if its a good upgrade then seems a bit of a bargin

It certainly is a worth while upgrade. That's the kit I got but purchased better pads as mentioned.

[GTi_Red]

sorry for all the quuestions but im just getting to grips with the modding side if things
seen as your thred is a bible i figured you might know, what dyou think would give more air a k&n conefilter on the end of the maf with no intake pipe or a panel filter with the cupra diesel intake? reason i ask is because the previous owner had it remapped with the k&n cone on and when i fit the standard box with standard intake pipe with pipercross panel filter its doesnt seem to run as smooth. i want the cone off as if i declair it insurance prices will go through the roof becuase im 18 and if i get pulled and they see it police will have something to say.
hope you can help
cheers

[9N3 Turbo]

sorry for all the quuestions but im just getting to grips with the modding side if things
seen as your thred is a bible i figured you might know, what dyou think would give more air a k&n conefilter on the end of the maf with no intake pipe or a panel filter with the cupra diesel intake? reason i ask is because the previous owner had it remapped with the k&n cone on and when i fit the standard box with standard intake pipe with pipercross panel filter its doesnt seem to run as smooth. i want the cone off as if i declair it insurance prices will go through the roof becuase im 18 and if i get pulled and they see it police will have something to say.
hope you can help
cheers

No problem re the question. That's what these forums are for.
The K&N cone will have a bigger surface area therefore would perform better than the other setup.
There is the option to get a cone in the box from Jabba sport and using the PD160 intake to the bottom of he airbox.
I ran this setup previously.

[lukey GTI]

sorry for all the quuestions but im just getting to grips with the modding side if things
seen as your thred is a bible i figured you might know, what dyou think would give more air a k&n conefilter on the end of the maf with no intake pipe or a panel filter with the cupra diesel intake? reason i ask is because the previous owner had it remapped with the k&n cone on and when i fit the standard box with standard intake pipe with pipercross panel filter its doesnt seem to run as smooth. i want the cone off as if i declair it insurance prices will go through the roof becuase im 18 and if i get pulled and they see it police will have something to say.
hope you can help
cheers

I run a open K&N cone dose the job pretty well

been pulled a few times lad and never have the police questioned any of my mods

but best to be safe after all the police are different in different areas

[GTi_Red]

sorry for all the quuestions but im just getting to grips with the modding side if things
seen as your thred is a bible i figured you might know, what dyou think would give more air a k&n conefilter on the end of the maf with no intake pipe or a panel filter with the cupra diesel intake? reason i ask is because the previous owner had it remapped with the k&n cone on and when i fit the standard box with standard intake pipe with pipercross panel filter its doesnt seem to run as smooth. i want the cone off as if i declair it insurance prices will go through the roof becuase im 18 and if i get pulled and they see it police will have something to say.
hope you can help
cheers

No problem re the question. That's what these forums are for.
The K&N cone will have a bigger surface area therefore would perform better than the other setup.
There is the option to get a cone in the box from Jabba sport and using the PD160 intake to the bottom of he airbox.
I ran this setup previously.

Thanks for the help but again while I'm too young to declair mods with out paying millions I don't was silicone hoses or anything obviously not standard if you catch my drift.

[GTi_Red]

sorry for all the quuestions but im just getting to grips with the modding side if things
seen as your thred is a bible i figured you might know, what dyou think would give more air a k&n conefilter on the end of the maf with no intake pipe or a panel filter with the cupra diesel intake? reason i ask is because the previous owner had it remapped with the k&n cone on and when i fit the standard box with standard intake pipe with pipercross panel filter its doesnt seem to run as smooth. i want the cone off as if i declair it insurance prices will go through the roof becuase im 18 and if i get pulled and they see it police will have something to say.
hope you can help
cheers

I run a open K&N cone dose the job pretty well

been pulled a few times lad and never have the police questioned any of my mods

but best to be safe after all the police are different in different areas

Have you declaired you're mods? I don't fully understand how the police work with stuff like this because there's loads of chavs in 1200 corsa and clios that are louder than a jet with blatantly illegal lights and they don't seem to get pulled but I know my luck I would and I've got to be good for the next couple months due to army training lol

[lukey GTI]

Nah lad i haven't declared anything ha iv got HID lights too .... they had a big crack down in my town at one point gave like 100 cars a Section
shut down a cruise in a under ground car park and blocked everyone in took a few cars off people and stuff too

since then the police have been pretty slack around here

[GTi_Red]

I suppose it depends on the copper on the day but do they tend to look under bonets and stuff ?

[lukey GTI]

most police unless a Petrol head will know next to nothing about what a cars engine is supposed to look like ... most people dont i doubt they would lift the bonnet up more paper work

I was talking to a guy at a party once after telling him all about my car and how its insured and everything he tells me he's a traffic cop he took the mick for a bit then said he would never do someone for mods because he loves cars and he couldn't be bothered with the hassle unless the driver was been a idiot with him

[GTi_Red]

Fair one I'm still undecided as I can't get in s**t for driving as it could result in loss of career in worst case sinario. But I've just seen the cone in a box and its only one 90 degree hose so I suppose if that's black and I get the top plate of the 'lid' in black it would look pretty standard. Any thoughts? Page 15 of this thread have a look

[benmkiv]

Got picked up for pressed plates on my mk2. This caught his attention and after I argued the legality of these he asked me to open the bonnet. It had. 20v turbo in it. He gave me a prohibition notice. You know what for? My battery being loose. don't worry about it mate!