cheap way to camber my 9n polo front and rear?
any ideas would b great cheers guys!
CAMBER!!!
-
Lucaio
- Bronze Member
- Posts: 226
- Joined: Mon Dec 10, 2012 5:29 pm
- Location: Cardiff, South Wales
- Contact:
Re: CAMBER!!!
Camber bolts on the fronts, and a few washers on the rears.
-
mark03polo9n
- New
- Posts: 23
- Joined: Mon Dec 10, 2012 8:49 pm
Re: CAMBER!!!
bit more specific please? as i thought front camber bolts (as in where strut fixes) was a fixed camber point and washers at the rear?
Re: CAMBER!!!
I bought some K-Mac Camber/Caster adjustable top mounts. Not cheap at £360.
Can change my camber is 60 seconds though
Can change my camber is 60 seconds though
-
RUM4MO
- Bling Bling Diamond Member
- Posts: 6079
- Joined: Sat Dec 30, 2006 9:12 pm
- Drives: B8 S4 & 6R/6C1 1.2TSI 110
- Location: Mid Lothian
Re: CAMBER!!!
Interesting idea, that might work with the 6N cars but not with the 9N cars, similarly a few washer on the rear will not do much, that end needs a set of these tapered shim packs to "cant" the hub over a bit.Lucaio wrote:Camber bolts on the fronts, and a few washers on the rears.