This will only fit cars that were built 2013 MY onwards
Stalks consist
LEFT
Indicator and main beam control
RIGHT
Trip Computer Control (rocker and ok button)
Rear Wiper Control
Front wiper Control
![Image](http://i1120.photobucket.com/albums/l483/Eddie-GT/polostalks_zps104366f7.jpg)
£25 Delivered
Were you able to just fit the stalk with trip computer buttons and enable it in VAG-COM to a Polo 6R that doesn't have the trip computer?If I add this stalk, will it enable trip computer ?
If yes, are there guides/write-up to show how to do it ?
What wiring/coding needs doing? I thought it was just a straight swap? One stalk with no trip buttons for one with buttons?Eddie-gt wrote:Still available
I can include the wires needed to the cluster
I can also fit and code it
3x wires need to be added to the plug that clips into the stalks and they go to the cluster plugcabbage_gti wrote:What wiring/coding needs doing? I thought it was just a straight swap? One stalk with no trip buttons for one with buttons?Eddie-gt wrote:Still available
I can include the wires needed to the cluster
I can also fit and code it
Is this easy to do? Would I need to remove the cluster? Is there a wiring diagram for this anywhere?Eddie-gt wrote:3x wires need to be added to the plug that clips into the stalks and they go to the cluster plugcabbage_gti wrote:What wiring/coding needs doing? I thought it was just a straight swap? One stalk with no trip buttons for one with buttons?Eddie-gt wrote:Still available
I can include the wires needed to the cluster
I can also fit and code it
Coding wise MFA has to be ticked in the cluster