Candy white 9n3 gti

whitegtipolo · Post by **whitegtipolo** » Tue Jul 29, 2014 4:36 pm

Look nice get the car dropped now

Scotland4jimbo · Post by **Scotland4jimbo** » Sun Aug 10, 2014 3:11 pm

Yeah I might try get her a bit lower but I would need to get a set of coil overs as I just have shorter springs fitted at the mo..
Hit a pheasant last week and killed my lower centre grille got a replacement coming but was really lucky not to damage my rad and intercooler ..

whitegtipolo · Post by **whitegtipolo** » Sun Aug 10, 2014 4:15 pm

oh no lol animals abuse cars when hit !!!

Scotland4jimbo · Post by **Scotland4jimbo** » Mon Aug 11, 2014 8:40 pm

Before...

After...

Much better.. Big thanks to Alex Perkins

Until the next kamikaze pheasant ....

whitegtipolo · Post by **whitegtipolo** » Sun Aug 17, 2014 11:02 pm

sweet

Scotland4jimbo · Post by **Scotland4jimbo** » Tue Aug 19, 2014 9:45 pm

Cheers ....

Engine management light came on the other day... Got it plugged in.... Had no miss fire so was thinking lambda sensor and yes bank 1 .. Light still off after it was reset but I bet it will come back... Had the same thing with my golf 1.8t ... Is this quite a common problem??

gti-joe · Post by **gti-joe** » Tue Aug 19, 2014 10:12 pm

I get the light on occasionally when there was a lot of surface water about or I drove through a large puddle. Used to scan it and yup lambda sensor bank one came up on the reader. Just used to clear it and it wouldn't come on again until the water or puddle scenario. Just passed an MOT and the exhaust gas analysis was spot on so there really isn't an issue with it coming on occasionally as far as I am concerned.

whitegtipolo · Post by **whitegtipolo** » Sat Aug 30, 2014 12:26 pm

Which sensor 1 or 2

Scotland4jimbo · Post by **Scotland4jimbo** » Sat Aug 30, 2014 12:58 pm

Sensor 1. Not came back on so far .

Sent from my iPhone using Tapatalk

whitegtipolo · Post by **whitegtipolo** » Wed Sep 03, 2014 11:53 am

sensor one controls fueling id replace it

Scotland4jimbo · Post by **Scotland4jimbo** » Wed Sep 03, 2014 8:20 pm

Even though after a reset it is still off??? If it comes back I will defo be replacing it...

Sent from my iPhone using Tapatalk

koosh · Post by **koosh** » Thu Sep 04, 2014 8:33 am

hi mate, its maybe even just worth checking the wiring to the lambda. since its under the car a little bit of water may be causing a slight short.... some tape will probably cure it if thats the case!

oh and i called up about recalls and apparently mines have all been done!

Scotland4jimbo · Post by **Scotland4jimbo** » Thu Sep 04, 2014 6:55 pm

Cheers m8.. Have a butchers at the weekend ..

Sent from my iPhone using Tapatalk

Gticrazy · Post by **Gticrazy** » Sun Oct 26, 2014 2:07 am

Hi ,could i ask what's lowered springs you are using at the moment ,looks just right imo thanks

Scotland4jimbo · Post by **Scotland4jimbo** » Sun Oct 26, 2014 1:25 pm

Not sure m8 they were on it when I bought my car..

Sent from my iPhone using Tapatalk

UK-POLOS.NET - THE VW Polo Forum