wire harness passage

[alexandervf]

Hi everyone,

I have a 9n and i was wondering if someone could shed some light regarding a question i have.

I need to pass two small wires from the drivers cabin/dashboard to the engine bay so that i can install a volt meter.

Can someone please tell me where to route them from.

Pics would be very helpful.

Thanks

[alexperkins]

Where is the volt meter being fed from?

[alexandervf]

From the cars main battery.

[alexperkins]

Silly question, but can you not just take the 12V feed from somewhere behind the dash?

[alexandervf]

I'd rather not....two main reasons.

1st. i m against the idea of having to chop off the main or any sub harness

2nd. the volt meter i m about to install is the ctek 56-531 where you can also plug your charger.

So, preferably, and for various other reasons i would like to take the wires direcrly to the battery.

Any idea where from can i route the wires,to the engine bay?

Alex

[alexperkins]

Fair enough - understand your reasons

The below post has it documented pretty well

http://www.uk-polos.net/view ... 43&t=51032

Normally the grommet behind the ABS pump is quite popular, but there are a few other choices.

[alexandervf]

Thanks for all the help.!