Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
ciclo wrote:diskoboy, remember you have to check the current flow diagrams before making any modification to the original wiring.
Perfect. I'll allready have the connectors - the red one is the same and the new 1k0972928 I have from an Passat - same connector used in the ignition/starter switch
All of the pins in the 16-pin-connector are the same in Polo year 2011 (6R) and 2016 (6C)
6C climatronic control unit DOES NOT WORK in a 6R. End of story.
On the vwvortex forum I found an interesting shelf from Golf VI (Rear Storage Tray, 1K0061178A): http://i227.photobucket.com/albums/dd15 ... e18b8d.jpg
This is very useful, but there is no such shelves for Volkswagen Polo
On the vwvortex forum I found an interesting shelf from Golf VI (Rear Storage Tray, 1K0061178A): http://i227.photobucket.com/albums/dd15 ... e18b8d.jpg
This is very useful, but there is no such shelves for Volkswagen Polo
This looks like something I definitely need. I found one for the polo but it is from china
On the other hand, it seems that the LEDs headlights provide good lighting at all times, but the appearance of the headlights is not my favorite.
They need a better design in appearance. IMHO
Hello.
Help me pls activate Auto folding mirrors on my VW Beetle 2014 (3 doors).
I have the same door component.
and my coding:
Address 09: Cent. Elect. (J519) Labels: 7H0-937-08x-09.clb
Part No SW: 7H0 937 090 B HW: 7H0 937 090
Component: BCM PQ25 Max4 H74 0712
Revision: B9074001 Serial number: 28013050140479
Coding: 7CB8697848430C0093A80F306CCB96C4AD42610F60842D41B2A0140A0000
Shop #: WSC 00066 123 12345
VCID: 2D51EF3674B133760F5-8078
Subsystem 2 - Part No SW: 6R0 959 801 BK HW: 6R0 959 801 BK
Component: J386__TSG_FT 003 8662
Coding: 0000A5
Yes, you are right, especially by the system of door closing.
But this is the best information I can provide..., however, if you lose some function, you will have integrate the Bits of your previous coding to the new coding. (enabling or disabling bits)
this coding dont work on my Beetle.
Beetle have frameless doors, ie glass on top has no border. (the same as VW Passat CC)
and when you open the door - glass drops slightly (exits the rubber seal 5 mm).
but after this coding - the glass does not fall and I can not open the door.