Suspension & Ignition problem

Chat about your 9n Polo (inc GT and Fun)
Post Reply
frexpoppo
New
Posts: 2
Joined: Sat Jun 20, 2015 10:36 am
Drives: VW POLO 1.4 year 2003

Suspension & Ignition problem

Post by frexpoppo »

Dear all,

Sorry I cant find the forum for VW POLO Year 2003!!!

I have a couple of questions regarding my VW POLO (1.4 year 2003).

1. I have to turn the ignition for the second time to get it started

2. When I drive over an uneven surface (bumps etc) I hear squeaking noise in the front passenger Wheel.

I took it to the local mechanic and he told me he checked it and the problem 1) need switch ignition replaces and problem 2) needs the wheel suspension arm replaced.

Since he asked me for quite a substantial amount of money I would like to be sure before I part with the money. Does anyone think this could well be the cause.

Many thanks in advance

frex
RUM4MO
Bling Bling Diamond Member
Posts: 6079
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: Suspension & Ignition problem

Post by RUM4MO »

Ignition switch, well if he says it is U/S then I'd expect it to be U/S. Noises from front suspension, sound like track control arm rear locating bushes knackered. He might be wanting to replace the complete assembly(s) that holds the bush(s), plus he might be quoting for carrying out a full four wheel realignment - that would explain a high cost, but probably necessary. Getting a good VAG indie to replace the bushes on both sides might be the better, but maybe same cost option.

Edit:- oh "WELCOME" and this is the correct forum for the 2003 9N Polo.
Last edited by RUM4MO on Tue Jun 23, 2015 6:06 pm, edited 1 time in total.
frexpoppo
New
Posts: 2
Joined: Sat Jun 20, 2015 10:36 am
Drives: VW POLO 1.4 year 2003

Re: Suspension & Ignition problem

Post by frexpoppo »

Thanks RUM4MO for your thought. That clarifies things for me.

Have a good day
Post Reply