This is more then just a worry, I would prefer all the lights front and rear be on or none at all. I have never left my lights on and always turn them on if driving conditions are becoming poor even in rain. Anyway not the point of the thread and I am sure loads of people find drl's very handy. In vcds module for the can bus I clicked on the installation list and had a nosey down the list. I checked the box with headlamp range and then backed out of it, found it did nothing so went back and unchecked the box. I now get the warning light on the dash telling me a bulb has blown which it has not, all bulbs are working perfectly. In the can bus module it shows the headlamp range module is not reachable (because I dont have one i guess but it is now turned off anyway) but as I have unchecked the box I cannot see what else I need to do to stop it from pulling up the fault and also displaying the blown bulb symbol?
(dammit) 
(I should remember that I should not read so fast English like Spanish)
