![Sad :(](./images/smilies/icon_sad.gif)
Any suggestions?
In short: How can I get the microphone used on the TPK to work with the RNS? I don't know where there is a connector for it on the unit.
It won't work like that because the RNS315 defaults to its own bluetooth controller as standard. The only way to get it to work as the OP is expecting is to disable this function. When I had my 6R I too changed from a RCD310 with TPK to a RNS315 and bought the mic adapter from here, it comes in two parts which is the extension cable and the microphone itself, as Alex said, just remove the stereo, route it through the trim above the pedals, tuck it into the A Pillar (it is only held in by 4/5 metal clips) then feed it into the headlining, snap off the blanking plate in the map lights, clip the microphone in and connect it all back together. I also removed the drivers sun visor so I could grab the cable from the A pillar and push it through to the map lights. Be careful not to pull on the headlining with too much pressure as it can easily loose its shape. Hours work tops.Willni wrote:Did you try to remove the little tpk screen it clips into the small swivel stand, since in theory it would turn it off. then if it did work you could just hide it behind the radio