so, you need to make another wiring like this.RekinPoznan wrote: ... and add auto switch.
Best Regards Chriss
ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
- RekinPoznan
- Getting There!
- Posts: 69
- Joined: Mon Apr 25, 2016 4:39 pm
- Drives: 6R
- Location: Poland
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hello
Ciclo in my model year A I have relay 331 in socket 4 ? and i must use (in your photo) small wire jumper , in this socket is two relays I must remowe left ? and connect pins 3 and 5 toghether.
in fuse box :
34B Split to new wire to T73a/62
39B cut original wire and split to T73b/2
59B cut original wire and split to T73a/2
New wire
39B ---> T73b/68
59B ---> T73A/63
Xenon range unit on the car connected tooday , waiting for leveling sensor only.
The wire T17/3 old now isolated is connected to old DRL (non led) in fog lamps , I use this wire with new relay for new instalation with auto switch (not needed to add new wire T73a/7 ---> T17/8 ---Ne wire Fuse 15A--- FOG) I planned use it with AUTO switch T10/5 ---> relay ---> FOG Right ?
Where is pin for xenon washer pump ? , i have planed wire for this.
Many thanks for understanding (better ask before replace instalation) and best regards Chriss
Ciclo in my model year A I have relay 331 in socket 4 ? and i must use (in your photo) small wire jumper , in this socket is two relays I must remowe left ? and connect pins 3 and 5 toghether.
in fuse box :
34B Split to new wire to T73a/62
39B cut original wire and split to T73b/2
59B cut original wire and split to T73a/2
New wire
39B ---> T73b/68
59B ---> T73A/63
Xenon range unit on the car connected tooday , waiting for leveling sensor only.
The wire T17/3 old now isolated is connected to old DRL (non led) in fog lamps , I use this wire with new relay for new instalation with auto switch (not needed to add new wire T73a/7 ---> T17/8 ---Ne wire Fuse 15A--- FOG) I planned use it with AUTO switch T10/5 ---> relay ---> FOG Right ?
Where is pin for xenon washer pump ? , i have planed wire for this.
Many thanks for understanding (better ask before replace instalation) and best regards Chriss
- iichel
- Bling Bling Diamond Member
- Posts: 6406
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Good work so far!
All wiring corret, remove and bridge relay 331, pin 3 to 5 yes
New wire from T17/3 to T73b/29 (DRL input signal)
Washer supply: T10/1 or T17/12 (auto or non auto light switch)
All wiring corret, remove and bridge relay 331, pin 3 to 5 yes
New wire from T17/3 to T73b/29 (DRL input signal)
Washer supply: T10/1 or T17/12 (auto or non auto light switch)
- ciclo
- Bling Bling Diamond Member
- Posts: 7843
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Pics:RekinPoznan wrote:Hello
Ciclo in my model year A I have relay 331 in socket 4 ? and i must use (in your photo) small wire jumper , in this socket is two relays I must remowe left ? and connect pins 3 and 5 toghether.
viewtopic.php?f=56&t=68139#p508917
https://drive.google.com/file/d/0B2nv91 ... RvU2c/viewRekinPoznan wrote:
in fuse box :
34B Split to new wire to T73a/62
39B cut original wire and split to T73b/2
59B cut original wire and split to T73a/2
New wire
39B ---> T73b/68
59B ---> T73A/63
https://drive.google.com/file/d/0B2nv91 ... d6MEE/viewRekinPoznan wrote:
The wire T17/3 old now isolated is connected to old DRL (non led) in fog lamps , I use this wire with new relay for new instalation with auto switch (not needed to add new wire T73a/7 ---> T17/8 ---Ne wire Fuse 15A--- FOG) I planned use it with AUTO switch T10/5 ---> relay ---> FOG Right ?
http://www.servimg.com/view/18943939/296RekinPoznan wrote: Where is pin for xenon washer pump ? , i have planed wire for this.
- ciclo
- Bling Bling Diamond Member
- Posts: 7843
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
T17/11iichel wrote: Washer supply: T10/1 or T17/12 (auto or non auto light switch)
- RekinPoznan
- Getting There!
- Posts: 69
- Joined: Mon Apr 25, 2016 4:39 pm
- Drives: 6R
- Location: Poland
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hello
Rewiring done , now DRL LED , and another functions works fine , many thanks for the support
Rewiring done , now DRL LED , and another functions works fine , many thanks for the support
-
- Getting There!
- Posts: 59
- Joined: Sat May 21, 2016 5:27 pm
- Drives: Polo 1,2 tsi 90bhp 6r,6c
- Location: Denmark
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Looks really nice. Need a R Line rear bumper. Can not find one with the diffuser on eBay. Only whole kits can be bought. Please help[emoji4]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- iichel
- Bling Bling Diamond Member
- Posts: 6406
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
New ones aren't overly expensive:
6R6 807 421 CH bumper
6R6 807 568 M diffusor
6R6 807 421 CH bumper
6R6 807 568 M diffusor
- ciclo
- Bling Bling Diamond Member
- Posts: 7843
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Thanks to you for sharing.RekinPoznan wrote:Hello
Rewiring done , now DRL LED , and another functions works fine , many thanks for the support
Please make a brief summary of what you've installed and is functioning properly. I do not remember the whole state (installations) of your 6R.
ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hi ciclo, I have adopted iichel's solution, and now everything is working perfectly. thanks to both of you.iichel wrote:try like this
[img]http://i.imgur.com/qP0OTBZ.png[/img]
One last question, where you have placed the resistors? because they really heat up!
Last edited by Bachecco on Sun May 22, 2016 4:36 pm, edited 1 time in total.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Bachecco wrote:Hi ciclo, I have adopted iichel's solution, and now everything is working perfectly. thanks to both of you.iichel wrote:try like this
[img]http://i.imgur.com/qP0OTBZ.png[/img]
One last question, where you have placed the resistors? because they really heat up!
- iichel
- Bling Bling Diamond Member
- Posts: 6406
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
On the metal of the body. So it can easily transfer heat
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
ok but how they attack? I can use the adhesive? because at that point I can't find holes where tie.
Inviato utilizzando Tapatalk
Inviato utilizzando Tapatalk
- iichel
- Bling Bling Diamond Member
- Posts: 6406
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
-
- Bronze Member
- Posts: 205
- Joined: Thu Jan 28, 2016 10:23 am
- Drives: 6R 1,6MPI(CFNA) sedan
- Location: Buzuluk, Orenburg region, Russia
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hello, Fernando and everyone!
I've started a facelifting mod to 6C look. Additionally retrofit headlight washers and front PDC.
Next step is 6C headlights and grill retrofitting.
Now question is concerning headlight washer adaptation. What adaptation channels of 09 Cent.Eletr. change washer running time and frequency?
I've started a facelifting mod to 6C look. Additionally retrofit headlight washers and front PDC.
Next step is 6C headlights and grill retrofitting.
Now question is concerning headlight washer adaptation. What adaptation channels of 09 Cent.Eletr. change washer running time and frequency?