G40 Style Exhausts

Toby · Post by **Toby** » Wed Aug 18, 2004 5:44 pm

Hi guys, anyone know where i can find a similar looking exhaust to the

Polo g40 or a company that can supply a cat-back system specifically for

the polo gti, trying to stay away from universal backboxes or will a

magnex one be ok. If i have to stick with a universal should i get the

centre pipe to be the same size as original or slightly bigger, don't want

to loose precious back-pressure which is vital on a n/a car. Also, will i

need spacers if using coilovers (h&r) and dropping 60-70mm?

Help would be really appreciated. cheers toby

Toby · Post by **Toby** » Wed Aug 18, 2004 7:48 pm

Anyone!!!! Is there not a good company that can supply a center pipe and back box (cat back system) thats specifically for the polo gti? Also anyone know about wheel spacers and h&r coilovers, will they be needed? Regards toby

Post by **Josh_PoloGTi** » Wed Aug 18, 2004 10:26 pm

Right then...

I had a 70mm drop with H&R coilovers and it was H A R D.

I wouldn't really recommend you go that low for long periods... Just the show season, then crank her back up a bit!

If you're using the standard BBS Splitties that come with the car, then 20mm hubcentric spacers and long bolts on the rear are a must.

It should look like this once it's done!

Post by **Josh_PoloGTi** » Wed Aug 18, 2004 10:28 pm

Oh, and exhausts...

Try Supersprint, Courtney had one on his and it was really nice.

Magnex ones are far too big for the car and hang down too low.

Prash · Post by **Prash** » Wed Aug 18, 2004 10:34 pm

lol Josh, your on a roll