infotainment 'display off in 10s' keeps resetting after restarting engine

Chat about your 6R/6C model Polos here!
Post Reply
Dan_Edin
New
Posts: 4
Joined: Mon Mar 13, 2017 9:30 pm
Drives: GTI
Location: Edinburgh

infotainment 'display off in 10s' keeps resetting after restarting engine

Post by Dan_Edin »

Hi. Just picked up new GTI today. absolutely loving it!

I like the 'display off in 10s' feature on the infotainment screen. However, every time i restart the car, the settings seem to have reset to default 'off' setting. Nothing else is reset so doesnt make sense?

Am i doing somethin wrong?

many thanks
patil
Gold Member
Posts: 502
Joined: Wed Dec 07, 2016 8:34 pm
Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
Location: Foothills of Nilgiris, India

Re: infotainment 'display off in 10s' keeps resetting after restarting engine

Post by patil »

hello Dan :D

Even I too noticed the same thing happening on RCD330+ on my Polo6R.

I tried looking for solution in Radio controller module 56 but found nothing useful.

It's a default factory setting I guess.

Will post if I find the solution.
joe6
Bronze Member
Posts: 246
Joined: Mon Aug 22, 2016 5:24 pm
Drives: Golf Mk6 GTI (Scirocco gone) Polo 6c GTI
Location: East Midlands

Re: infotainment 'display off in 10s' keeps resetting after restarting engine

Post by joe6 »

Dan_Edin wrote:Hi. Just picked up new GTI today. absolutely loving it!

I like the 'display off in 10s' feature on the infotainment screen. However, every time i restart the car, the settings seem to have reset to default 'off' setting. Nothing else is reset so doesnt make sense?

Am i doing somethin wrong?

many thanks
Had a similar fault on a Golf where the radio did not turn on automatically when restarting. Turned out to be the ignition switch contacts that were faulty.
Dan_Edin
New
Posts: 4
Joined: Mon Mar 13, 2017 9:30 pm
Drives: GTI
Location: Edinburgh

Re: infotainment 'display off in 10s' keeps resetting after restarting engine

Post by Dan_Edin »

thanks guys. Its a good feature. shame not working properly!
Post Reply