MFSW Controls for 2011 1.4 Polo GTI

Chat about your 6R/6C model Polos here!
Post Reply
dillan_94
New
Posts: 6
Joined: Sat Jun 10, 2017 7:34 pm
Drives: 1.4 GTI
Location: London, United Kingdom

MFSW Controls for 2011 1.4 Polo GTI

Post by dillan_94 »

Hey all,

I'm hunting around for mfsw controls for my 2011 1.4 Polo GTI.

It looks like this one in the silver metal housing would be the correct fit for my steering wheel, howeve at £200 its a little pricey:

http://www.ebay.co.uk/itm/Genuine-VW-Po ... SwU8hY6UhR

I've found some very similar looking controls at a fraction of the price, which are listed for a Tiguan Passat, however they look almost identical even with the wiring. The only difference is the metal frame.

https://www.aliexpress.com/item/OEM-VW- ... c667&tpp=1


Do you think the passat ones would be compatible with my polo?

Cheers. Dillan
JIC Cracked
Silver Member
Posts: 397
Joined: Wed Mar 23, 2005 12:33 am

Re: MFSW Controls for 2011 1.4 Polo GTI

Post by JIC Cracked »

Hi Dillan

http://www.ebay.co.uk/itm/Genuine-VW-Po ... SwU8hY6UhR

Is actually my listing on eBay, which is the correct fit for 2011 VW Polo 6R GTI.
It's my last set of MFSW buttons for the GTI/R-Line/BlueGT Flat Bottom Steering wheel.
As your a forum member, I give you a better price for the whole set 8)
PM me for more information.

The Passat version sold on aliexpress, will not be compatible with your Polo 6R GTI Steering Wheel.

I hope that helps.
dillan_94
New
Posts: 6
Joined: Sat Jun 10, 2017 7:34 pm
Drives: 1.4 GTI
Location: London, United Kingdom

Re: MFSW Controls for 2011 1.4 Polo GTI

Post by dillan_94 »

Hey JIC Cracked,

I'm new to the forum so can't initiate the private message. Can you private message me or send over some contact details?

Also with regards to coding with VCDS, would that be required and is it something you can provide?

Cheers.

Dillan
JIC Cracked
Silver Member
Posts: 397
Joined: Wed Mar 23, 2005 12:33 am

Re: MFSW Controls for 2011 1.4 Polo GTI

Post by JIC Cracked »

Hi Dillan

Okay sure I have sent you a PM, please check your inbox.

In terms of coding with VCDS, it would be required when retrofitting MFSW buttons to your GTI.
I also provide a retrofitting service, so I have access to main dealer services and equipment if your require at extra cost.

Kind Regards S
Post Reply