A brief parentheses on my second vacation.
An small gift to iichel and info to all (Remember, POLO 6R
Europe 2009-2014, PQ25)
Due to his new and great project. I suppose he will keep us informed.
I hope the masters of the universe are with you, Michel.
Subsystem 7 - Part No SW: 6C0 959 442 C HW: 6C0 959 442 C
Component: E221__MFL-DC1 H03 0102
Coding: B0FFFF
viewtopic.php?t=58703&start=2805#p515929
These are the only buttons with cruise control that fit in 6R/6C Sport Steering Wheel (new model), the T6 does not have this model of steering wheel from factory, but I would also recommend testing the buttons from the T6... perhaps the integrated circuits can be interchanged.
WD
100%, only for mfsw with CCS or ACC buttons. (Euro6 emissions)
This diagram (above) is the one I did when I installed these buttons on my steering wheel.
Once that I discovered in the BCM the Bytes that make them work
...
- Byte29 Bit6 for the right side (MFA and phone, etc)
- Byte17 Bit2 for the left side (CCS)... the buttons are recognized in the engine unit (0/I, Set, Resume, Cancel, +, -) according to the values measurement (vcds).
... the following faults are obtained in the engine unit due to the ABS unit according to ODIS and possibly to other incompatibilities (unknown to me).
Engines Polo 6R = Euro5 or Euro5 plus. ABS unit = TP 1.6
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZC) Labels: 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 GD HW: 03F 907 309 AJ
Component: SIMOS10.22AH10 2686
Revision: --H10--- Serial number: 00000000000000
Coding: 001100D6202400080000
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_ECM12TFS02103F906070GD 004004
ROD: EV_ECM12TFS02103F906070FJ.rod
VCID: 6A6F2A343F080FD83D-803E
2 Faults Found:
6117 - Function Restriction due to Implausible Message(s)
U1112 00 [039] - -
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 17415 km
Date: 2016.03.04
Time: 01:45:59
6116 - Function Restriction due to Faults in Other Modules
U1113 00 [039] - -
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 17415 km
Date: 2016.03.04
Time: 01:45:59
Readiness: 0110 0101
No faults in other units.
-------------------------------------------------------------------------------
I installed a new T2 connector for testing with the LIN wires.
- the communication wire with the ECU was changed from T41/26 or T41/29 to T41/11. (T73b/45 not required)
New stalks without CCS buttons are required (see first image).
I'll send them to you on Monday, Michel.