ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝

[iichel]

[ciclo]

Good one, iichel.
-----
Also doing smart things.

Instead of buying a new TPMS unit with old software ...








280 km/h....

[iichel]

LOL why not

[ciclo]

It will be installed on my 6R at my VW dealer, within a month, I guess.

[Adam87]

[emoji23]if it doesn't work.... get rid and buy a new one to make it work, I like it Fernando [emoji106]

[edinogti]

Ciclo can you tell me something about what I wrote to you before?

[rdasadia]

Good one, iichel.
-----
Also doing smart things.

Instead of buying a new TPMS unit with old software ...








280 km/h....

@ciclo

[ciclo]

hello ciclo
then I'll tell you what I would do
In practice I mounted pneumatic suspension with electronic management
I would like to make sure that once I close the car with the remote control the car will lower itself
for this I have already resolved by purchasing a timed relay card, which I have already tested and works perfectly
my problem is this
the impulse that I should give to my timed card I should take it only at the time of closing the machine
the problem is that in the wiring harness of the door lock if I receive the pulse from the closing wire the current arrives either with the open key or with the close button on the remote control you understand?
I would like to see if there is a single signal somewhere that will either turn on or off only when the car is closed
understand ciclo?

Ciclo can you tell me something about what I wrote to you before?

I explain you:
I used the signal of the T28a/22 wire that I told you earlier to close the folding mirrors when close the car with the remote control (for my NO OEM installation of folding mirrors), everything worked correctly because the/my external module managed both signals. (Opening and closing).

I don't know if there is another signal in electrical system that be useful for what you want to achieve.

[ciclo]

[emoji23]if it doesn't work.... get rid and buy a new one to make it work, I like it Fernando [emoji106]

(I'm guilty)

If I had purchased the TPMS unit with the older software (B,D) the cost would have been similar, so I chose to buy a IC with MFA+ (brand new) with the software updated.

I do not know if the TPMS units I already have (3AA... F and H) will work with this new IC, ...in rdasadia's 6R it works correctly.

...at least I will have the software updated on both units (IC, TPMS)...

[ciclo]

@ciclo

By the way, your MFSW harness is in my VW dealer, but I'm waiting for other parts to arrive to go to pick them up at the same time.

[edinogti]

hello ciclo
then I'll tell you what I would do
In practice I mounted pneumatic suspension with electronic management
I would like to make sure that once I close the car with the remote control the car will lower itself
for this I have already resolved by purchasing a timed relay card, which I have already tested and works perfectly
my problem is this
the impulse that I should give to my timed card I should take it only at the time of closing the machine
the problem is that in the wiring harness of the door lock if I receive the pulse from the closing wire the current arrives either with the open key or with the close button on the remote control you understand?
I would like to see if there is a single signal somewhere that will either turn on or off only when the car is closed
understand ciclo?

Ciclo can you tell me something about what I wrote to you before?

I explain you:
I used the signal of the T28a/22 wire that I told you earlier to close the folding mirrors when close the car with the remote control (for my NO OEM installation of folding mirrors), everything worked correctly because the/my external module managed both signals. (Opening and closing).

I don't know if there is another signal in electrical system that be useful for what you want to achieve.

in fact with that module I could solve the problem. Where can I recover that form?

[ciclo]

in fact with that module I could solve the problem. Where can I recover that form?

I do not understand correctly what you mean.
Hmm ...
viewtopic.php?f=56&t=58703&start=75#p472068
... in case it is useful for you.

[edinogti]

in fact with that module I could solve the problem. Where can I recover that form?

I do not understand correctly what you mean.
Hmm ...
viewtopic.php?f=56&t=58703&start=75#p472068
... in case it is useful for you.

no excuse I wanted to tell where I can buy this form?

[ciclo]

For example:
https://es.aliexpress.com/af/AUTO-Intel ... isViewCP=y

[ciclo]

It will be installed on my 6R at my VW dealer, within a month, I guess.

October 11, 2017