When I bought the two TPMS units, and still did not know for certain what was the reason why I could not get the tire pressure menu in my IC, something very funny happened to me.
The two units I bought:
- the right TPMS unit,
3AA 907 273 H with F software. https://i.ebayimg.com/images/g/89kAAOSw ... -l1600.jpg (ebay). This one: viewtopic.php?f=56&t=58703&start=3645#p525012
- the wrong TPMS unit (a used part),
3AA 907 273 F with H software. The seller made a mistake, or did not know what he was selling. (no need to say where I bought it)
The wrong is this one: viewtopic.php?f=56&t=58703&start=4005#p529257
In those moments of confusion I thought that nothing was going the right way, and I thought that these TPMS units was a damn joke
.. "two TPMS units bought in different places with the software exchanged". As always I thought, cheap parts, bad result. 
As you all know, I made a Kit for TPMS units. I upload the image here again.
...and yesterday I used it to load the correct software for PQ25 in the wrong TPMS unit, I also did the editing of parameters (with some parameters that a forum user sent me)
The next image is intentionally blurred.
These are the parameters that the forum user sent me. (Benji58)
And here the result of the process.
And I already have another unit that works correctly for the PQ25 platform and the rest of the necessary units.
It was sold to Benji58 for a reasonable price.
---
Apart:
I reinstall everything by disconnecting the Kit, leaving my original VCP connected, and edit the parameters of my installed unit on rear bumper with the following configuration.
This will allow me to know if the system works correctly without having to deflate the wheels, that is, sitting in the driver's seat.
MaDwArLoCk IC (Warning TEST)
viewtopic.php?f=56&t=58703&start=3450#p522430
