Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
- the T10-T14 kufatec harness for Bixenon headlights.
- wiring for RLS and auto dimming mirror.
- wiring for automatic lights.
...these will be your new codings:
New BCM coding
22B02BBF08FB2400B3380F916CEB0ED05A80672F60053041200000030000
RLS coding
- with AFS system
07302D - without AFS system
06302D
Check out the first page of my topic for other changes/adaptations in the lights (if you want). Hmm ... better ask me about them by email, I've deleted them from the first page of my topic. Who needs them can look for them among all the pages of my topic ...
(post an Autoscan if you have any problem after your installations)
The wiring for the auto dimming mirror and RLS that I made for you has a T6 connector installed for the dimming mirror.
The mirror that you now want to install needs a T8 connector.
I asked you about this and I told you that all the mirrors did not have the same connectors to be able to manufacture your wiring for RLS and auto dimming mirror. (check private messages)
Perfect , then you will have to do a process similar to this viewtopic.php?f=56&t=58703&p=502496#p502505 to change the 3AA retaining plate ("mount" according iichel ) or change the windshield with the correct retaining plate.