graylscott wrote:graylscott wrote:Wow! Those mods tho! Beautiful van!
Three questions if I may....
1. Where did you source the instrument cluster? I want!
2. How did you overcome component protection on the Discover Media? Again, I want!
3. Did you need to change your washer bottle for the headlight washers? If so, do you have the part numbers for the bottle and the pipework?
(I already have the loom, pump, washer pops, covers and the new bumper. These are the missing parts)
Thanks in advance!
And well done sir!!!
Certainly....
1. From TPS (make sure you’re sat down [emoji383][emoji22])
2.component protection requires a few parts to make to radio function without it activating (I’ll make a separate post)
3. I’ve not changed the bottle yet, just ran all the pipework near it, I just need to add the pump and wiring. I’m sure the part number was the same last time I checked but I don’t remember seeing an obvious location for it [emoji848]
Hi Adam
I have spoken to TPS about the 3D cluster, but they say it is coded to VIN and they need the old cluster back. Did you come up against this?
Also, just in case you haven't done it yet, the bottle is indeed different. I paid about £50 from TPS for the correct one. I'll update with part number if I find it.[/quote]
Great, I couldn’t find a different part no on Etka, it’s been a while since I last looked.
Yeah I have them a VIN number, not that it makes much difference to the cluster, and I did give one back in return but it was an old low line caddy one, I knew the guy on the parts desk at VW and his only concern was that there was something in the box to give back.