OK so to remove the starter motor is not hard on the polo.
- Take off battery cables (2x 10mm)
- Undo (1x 13mm) bolt that holds the battery and remove the battery
- Undo (3x 13mm) screws that hold the battery box and remove it (there are pins to split the box to remove inner cables)
- Remove the clip and the power cables (1x 13mm) from the starter solenoid
- Remove the cable from the starter mount (1x 13mm)
- Undo top and bottom screws that hold the starter motor (2x 18mm)
- Remove the starter
The procedure was fairly simple the clutch control arm got in the way but nothing serious.
Cleaned it out and lubed it up, all is good now
