Does any one no of you can display short term mpg on active info display? Only seems to show long term???
Thanks
Sent from my iPhone using Tapatalk
Active info display
-
- Bling Bling Diamond Member
- Posts: 2643
- Joined: Fri Feb 23, 2018 9:58 pm
- Drives: Audi A4 Avant Quattro 40 TDI, Polo GTI+
- Location: Newcastle upon Tyne
-
- Silver Member
- Posts: 276
- Joined: Mon Jun 25, 2018 10:56 am
- Drives: Polo SEL 1.0 TSI 115PS
- Location: North Yorkshire
Re: Active info display
If it's the same as the previous Polo, press the OK button to toggle between long term, since refuel, and since start.
***EDIT*** Or more likely as monkeyhanger said as I was posting this
***EDIT*** Or more likely as monkeyhanger said as I was posting this
Re: Active info display
Sorted thanks [emoji1360]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Bronze Member
- Posts: 108
- Joined: Tue Aug 13, 2019 9:36 pm
- Drives: Her Polo R. Or my car.
- Location: Central Scotland
Re: Active info display
I've adjusted the alternative screen views 2 and 3, but every time I select parameters to display on the LH and RH dials it never saves my selection.
I can see that the default View 1 is preset, but expected View 2 and View 3 to be available for 2 drivers to show their choices.
Seems View 2 and View 3 are alse preset. But not to what I want.
Seems odd. Or am I missing a SAVE button somewhere.
Honest. I've read the manual and spent time poking the dashboard many times.
I can see that the default View 1 is preset, but expected View 2 and View 3 to be available for 2 drivers to show their choices.
Seems View 2 and View 3 are alse preset. But not to what I want.
Seems odd. Or am I missing a SAVE button somewhere.
Honest. I've read the manual and spent time poking the dashboard many times.
-
- Silver Member
- Posts: 439
- Joined: Sun Aug 05, 2018 5:14 pm
- Drives: AW GTI with MT
- Location: Czech republic
Re: Active info display
I might remember it wrong since I setup my dial more than year ago.Boxerboy wrote: ↑Thu Mar 12, 2020 8:30 pm I've adjusted the alternative screen views 2 and 3, but every time I select parameters to display on the LH and RH dials it never saves my selection.
I can see that the default View 1 is preset, but expected View 2 and View 3 to be available for 2 drivers to show their choices.
Seems View 2 and View 3 are alse preset. But not to what I want.
Seems odd. Or am I missing a SAVE button somewhere.
Honest. I've read the manual and spent time poking the dashboard many times.
There was auto/classic/view1/view2/view3 buttons. Auto and classic was preset and no way to change them and views1/2/3 whould be user presets. I changed view 1 to whatever I liked most and than pressed media or app connect button to go back to screen I ussualy use. I don't think there is save button.
Re: Active info display
Hold down on the view 1 ,2 or 3 when you set your Desired display setting it will turn yellow and save view 1 ,2 & 3
- OomStu_ZA
- Gold Member
- Posts: 625
- Joined: Mon Apr 22, 2019 6:06 pm
- Drives: 2019 VW Polo GTi
- Location: Cape Town, South Africa
Re: Active info display
Ahhhh, thanks for that tip will try it once we out of lockdown.
Interestingly if you have no NAV from facotry there only 2 additional views for the AID, not 3, but makes sense to me all the same.