does any1 know the stud pattern of a Nissan micra (1996)?
i was wondering if my wheels off my mk4 would fit.
Cheers
PCD
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland
http://www.performancecentre.co.uk/default.htm?page=282
100NX, Almera, Micra, Sunny 4 x 100 35...42 59.0
Corrado, Golf, Lupo, Jetta, Passat >96, Polo, Vento 4 x 100 32...38 57.0
so yes, if they are 4 stud they'll fit, but should really ahve a bigger spiggot ring made up so they sit flush on the hub.
100NX, Almera, Micra, Sunny 4 x 100 35...42 59.0
Corrado, Golf, Lupo, Jetta, Passat >96, Polo, Vento 4 x 100 32...38 57.0
so yes, if they are 4 stud they'll fit, but should really ahve a bigger spiggot ring made up so they sit flush on the hub.
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland
-
16v_po-low
- Getting There!
- Posts: 86
- Joined: Tue Dec 16, 2003 11:42 pm
- Location: Rugby, UK
- Contact:
-
bstardchild
- Moderator
- Posts: 3057
- Joined: Sun Mar 28, 2004 9:53 pm
- Location: Norfolk - "Its just Black & Dirty"
LOL big brakes - Nova16v_po-low wrote:regal autos may be useful for a centre ring, when puttin calibra turbo brakes on a nove the disc is bigger than the hub and needs a thin ring to hold it central
One of my early cars was a 1.4 SR and i shoehorned a 130 SRi cavy lump in there...... that needed bigger brakes but also needed 500 kg of pig iron in the shell to keep the blasted thing on the road - for two years skitish was my middle name!!!!