THE EASIER WAY TO LOWER MY POLO

Chat about your 9n Polo (inc GT and Fun)
Post Reply
vwpower
Bronze Member
Posts: 162
Joined: Fri Dec 27, 2002 4:06 pm
Location: Guatemala
Contact:

THE EASIER WAY TO LOWER MY POLO

Post by vwpower »

My polo was made in Brasil and I don`t know if only there are kind of taller compared to the height I have seen over europe.
So I need to lower my polo the fastest way before I save for a better Kit.

So I found this spare parts that they say you can lower your car. I have some friends that they already used them and they say the work great. So I decided to try.
Image

So this is how it looks before ... ...Kind Of tall
http://www.gtstreetracing.c.net.gt/vhg/ ... b20035.jpg

So this is what this kit do. It only compress the springs
Image
Image

And the Final work look like this. Compare with a picture of a before and after
Image


I took measures before and after
And on the rear i get low about 33mm = 1.3 Inches
And on the front about 38mm = 1.5 Inches

The suspension gets a little hard. But not to much. I went to try it on some roads and you could not believe how well it handles now.

And how mouch it cost me ?
I got to get 4 kits of those. One for each spring
One kit costs me $7.8 Us
total $30 us :P
User avatar
Josh_PoloGTi
Site Admin
Posts: 2782
Joined: Wed Oct 09, 2002 8:32 pm
Drives: BMW E85 Z4 3.0i
Location: Sheffield, UK
Contact:

Post by Josh_PoloGTi »

Wow! :shock:

That's looking good!

Cheap too!
des_pd_ tdi
Gold Member
Posts: 568
Joined: Mon Nov 18, 2002 5:17 pm
Location: London

Post by des_pd_ tdi »

Thing is how long will that type of modification last for.

I have to admit your car looks better for it but I'd be a touch nervous clamping down your springs.
polo2k
Bling Bling Diamond Member
Posts: 3297
Joined: Tue Dec 10, 2002 1:01 pm
Location: Swindon
Contact:

Post by polo2k »

if i were you id take those off and invest in some springs to put over the stock dampers because you have now got a spring with a load of conflicting forces and also some huge chunks of metal in between the coils so if you hit a big bump its going to compress the spring onto theese clamp thingies and then try to crush the clamps
i cant really go into much more deatail because i have to go work on the car but if you want i can after inters
Speedlaw
Moderator
Posts: 2852
Joined: Wed Nov 27, 2002 11:04 am
Location: Netherlands
Contact:

Post by Speedlaw »

I'd have to agree with the guys on this one...

It looks better, but I'd consider this to be a temporary mod only. I'm pretty sure you'd be much happier with a complete kit in the long run.

Other than that, it does give you an idea on how the lowering looks - not bad, now does it?

:D
vwpower
Bronze Member
Posts: 162
Joined: Fri Dec 27, 2002 4:06 pm
Location: Guatemala
Contact:

Post by vwpower »

Yes I know all the cons. of installing this things but as I said
Is provisional, I just want to see how it will look lower. Over here in my country is to difficult to find accesories for VW. So is allot more of $$$$ not just to get them but to bring them all over UK- So I`m Saving some money for the coiollovers. 8)
Post Reply